Identifying part number for G30 interior trim

Identifying part number for G30 interior trim

Author
Discussion

joropug

Original Poster:

2,700 posts

196 months

Tuesday 30th January
quotequote all
I have just put a deposit down on a 2020 / 69 G30 5 Series - 2.0d MHEV which I think are slightly different interior wise to the 2017 on first iteration.

The interior trim pictured below has a protective layer which has lifted so would like to replace this - looking on eBay I can only seem to find the Rhombicle Alu version - Mine appears to be brushed from my memory/photos I took.

Can anyone share the part number for my version? Was looking on realoem but couldn't seem to get interior bits to show, also the car was not specifically listed, cutting off at 2019 although this may be accurate and mine was late registered before the facelift.

Hoping to set up an eBay alert and wait for a used one to come up - looks like the whole panel is required unless I can lift the silver bit from one and install into my original.


E-bmw

9,976 posts

159 months

Tuesday 30th January
quotequote all
Go to realoem.com and you can search for yourself.

mmm-five

11,440 posts

291 months

Tuesday 30th January
quotequote all
The top trim is part of the brushed alu trim p/n 51169380180

No sure if you'll find it as a single piece rather than as part of a kit though...for example this ebay listing...
https://www.ebay.co.uk/itm/295991529552

Or new...
https://www.sytnerstevenagebmwparts.co.uk/p/Bmw__/...

Item #1 from this RealOEM diagram...
https://www.realoem.com/bmw/enUS/showparts?id=32DW...


worsy

5,952 posts

182 months

PistonHead007

265 posts

38 months

Tuesday 30th January
quotequote all
That's what happens when someone uses overly aggressive cleaning products. A simple wipe with a damp microfibre does the trick.

joropug

Original Poster:

2,700 posts

196 months

Tuesday 30th January
quotequote all
Thanks for the rapid response all that's great.

I had searched Realoem per OP but I was somehow failing to navigate to the right section.

I'll have to keep a keen eye out for a used part if possible otherwise I'll just have to buy a set like mentioned and part it out.

I did consider removing it, stripping back this layer and wrapping it with a vinyl wrap of some description. I guess I'll have nothing to lose so might be worth a go regardless even if it's to resell.