Discussion
Caddyshack said:
Were all the comments about Cerberas?
I have usually tried to stay on subject, TobyBUT
Some contributors' comments have dragged me from the golden path.
AND
As we're ont' subject:-
Does anyone have a clue as to the AJP 8's Oil Pump's output pressure ?
i.e. Does anyone really believe the Oil Pressure Guage's accuracy ?
Ta !
Edited by Mr Cerbera on Tuesday 24th October 18:46
Don't start working out how much time you've spent making those replies either....
Oil Pressure Gauge is probably close enough tbh.
20 PSI at Idle, warm, OK
45 PSI at 5000 revs/min and above when hot, also OK.
The Cerb over cools its oil due to the massive 19 row oil cooler.
As for Oil Starvation due to the sump design, that's a different matter.
Oil Pressure Gauge is probably close enough tbh.
20 PSI at Idle, warm, OK
45 PSI at 5000 revs/min and above when hot, also OK.
The Cerb over cools its oil due to the massive 19 row oil cooler.
As for Oil Starvation due to the sump design, that's a different matter.
ridds said:
....
20 PSI at Idle, warm, OK
45 PSI at 5000 revs/min and above when hot, also OK.
The Cerb over cools its oil due to the massive 19 row oil cooler.
Thanks Ridds , I appreciate that.20 PSI at Idle, warm, OK
45 PSI at 5000 revs/min and above when hot, also OK.
The Cerb over cools its oil due to the massive 19 row oil cooler.
I was checking values, before I purchase my replacement pipes.
I was quite shocked to discover that the current pipes are rated at 1880 psi !
Just a touch over-engineered I think.
Edited by Mr Cerbera on Friday 3rd November 09:01
Gassing Station | Cerbera | Top of Page | What's New | My Stuff