Weird clicking noise.
Discussion
Put the bike on the centre stand and then use a screwdriver, or similar, to lift/lower the chain above and below the swingarm to see if you can replicate it.
Possibly just the weight of the bike altering the swingarm angle/chain tension which makes it 'interfere' with something else e.g. chain guide/runner, sprocket cover etc.
Possibly just the weight of the bike altering the swingarm angle/chain tension which makes it 'interfere' with something else e.g. chain guide/runner, sprocket cover etc.
“added some extra chain grease”
Was it on the dry side for some time before? It and the sprockets could be worn.
Id also double check the alingment and check the front sprocket is secure, either of those not correct or tight will make the chain run out of true and click as it tries to climb the sprocket.
Was it on the dry side for some time before? It and the sprockets could be worn.
Id also double check the alingment and check the front sprocket is secure, either of those not correct or tight will make the chain run out of true and click as it tries to climb the sprocket.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


