Looking for Steel Pressing companies
Looking for Steel Pressing companies
Author
Discussion

pete_esp

Original Poster:

317 posts

111 months

Tuesday 15th November 2022
quotequote all
Hi All,

Once again I need to invoke the PH hive mind!

I need to find steel pressing companies that could press and possibly assemble runs off my product. If you own or know of any could you point me in there direction?

Cheers,

Pete

Strocky

2,742 posts

129 months

Tuesday 15th November 2022
quotequote all
Any local laser shop with a brakepress should be able to help you out
They'll prob be a min charge of £150/£250 per order so might be best to get a job lot done at a time

zedx19

2,981 posts

156 months

Tuesday 15th November 2022
quotequote all
If it's thin gauge metal sheeting you want brake pressed, Corrivo in Burton come highly recommended from me. Speak with Hannah.

If it's something more complex, then you'll need a more specialist fabricator, like BTS or Andian fabrications. Ben @ BTS or Ian @ Andian.

All depends on what you're after really, as all the above are fabricators to the roofing and cladding trade so may not be interested.

Rodintee

85 posts

119 months

Tuesday 15th November 2022
quotequote all
Pete
I own and run a small fabrication and sheet metal business in Stafford. I may be able to help, depends whats involved obviously but happy to have a look at it.
Cheers, Russ

pete_esp

Original Poster:

317 posts

111 months

Tuesday 15th November 2022
quotequote all
Hi Russ, great!

Ping me an email and we’ll set up a time to talk.

Pete

pete_esp

Original Poster:

317 posts

111 months

Friday 18th November 2022
quotequote all
zedx19 said:
If it's thin gauge metal sheeting you want brake pressed, Corrivo in Burton come highly recommended from me. Speak with Hannah.

If it's something more complex, then you'll need a more specialist fabricator, like BTS or Andian fabrications. Ben @ BTS or Ian @ Andian.

All depends on what you're after really, as all the above are fabricators to the roofing and cladding trade so may not be interested.
Thanks Zed, I'll look them up!