Smart ideas to integrate TV here?
Discussion
Chaps, advice from the knowledgable please.
I’ve moved to a new house and am struggling to work out the best / least intrusive position for the TV.
The gap between the fireplace and wall is approx 1118mm, the TV is 1219mm and Sonos bar is 1142mm.
I bought a Sanus stand which allows some swivel but the TV has sort of taken over the room, I’m wondering whether I need to buy a smaller TV, sacrilege I know! And the sound bar is still too wide doh!

I’ve moved to a new house and am struggling to work out the best / least intrusive position for the TV.
The gap between the fireplace and wall is approx 1118mm, the TV is 1219mm and Sonos bar is 1142mm.
I bought a Sanus stand which allows some swivel but the TV has sort of taken over the room, I’m wondering whether I need to buy a smaller TV, sacrilege I know! And the sound bar is still too wide doh!

Bracket on the chimney breast, fold out the way when not in use - into the alcove, pos flat it the depth of the chimney breast allows it, and then swing it round when in use.
Doh - ignore that, just noted your measurements! Err... Smaller TV plus the above?!
Doh - ignore that, just noted your measurements! Err... Smaller TV plus the above?!
Edited by rix on Sunday 26th December 17:53
It would take a bit of head scatching to work it out but i have done it in the past if you absolutely have to keep the tv and soundbar.
Long, single arm, dual pivot, swivel bracket on the same wall as the window, set in a little from the front edge of the chimney.
TV and soundbar on the wall bracket and set so the is pivot / swing is from a diagonal with the tv tucked in the alcove, LHS in the back corner of the wall/chimney, RHS of tv probably close the the window edge.
The as it pulls out, the tv will sort of slide sideways to sit at almost at the other extreme, either out in the room as it is in the photo or more infront of the window.
Does that work. Plenty of brackets offer hangers for soundbar.
Long, single arm, dual pivot, swivel bracket on the same wall as the window, set in a little from the front edge of the chimney.
TV and soundbar on the wall bracket and set so the is pivot / swing is from a diagonal with the tv tucked in the alcove, LHS in the back corner of the wall/chimney, RHS of tv probably close the the window edge.
The as it pulls out, the tv will sort of slide sideways to sit at almost at the other extreme, either out in the room as it is in the photo or more infront of the window.
Does that work. Plenty of brackets offer hangers for soundbar.
A floorplan with dimensions would be useful....if it *has* to go in that corner, you definitely need a smaller TV, possibly a lot smaller if you don't want it dominating the room. But the position of the window and depth of the fireplace are always going to be a compromise.
("Modifying" the fireplace might not be a bad shout!).
("Modifying" the fireplace might not be a bad shout!).
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff