Detailers who treat rust
Detailers who treat rust
Author
Discussion

Slowboathome

Original Poster:

4,461 posts

74 months

Thursday 7th October 2021
quotequote all
My MT07 has a rust problem. I've had a chat with a helpful restorer who said the most cost effective approach would be to go to a detailing firm that offers rust treatment as part of their service.

Does anyone know of such a firm in the East Midlands/Derbyshire/South Yorkshire area?

Thanks.

trickywoo

14,235 posts

260 months

Thursday 7th October 2021
quotequote all


Not many detailers do bikes never mind rusty ones.

What exactly is rusty? If it’s nuts and bolts etc. Get new ones from Pro Bolt.

If it’s frame etc. you’ll need someone who repairs crash damage IMO.

If you could find a detailer willing to give it a go it wouldn’t be cost effective and would likely come back again.

Edited by trickywoo on Thursday 7th October 09:01

steveo3002

11,223 posts

204 months

Thursday 7th October 2021
quotequote all
not a detailer job imo...

as said either replace rusty parts with new or tke them off for powdercoat or paint

Stuart Fordyce

2,541 posts

91 months

Thursday 7th October 2021
quotequote all
An MT-07 having a rust problem must be a bit disappointing - they're not that old. Unless you're at the seaside. Unfortunately you have to treat rust rather than polish it out. Would help if we knew which bit it was?

airsafari87

3,306 posts

212 months

Thursday 7th October 2021
quotequote all
As others have said its generally not a job a detailer will pick up. BUT ....

Give Paul at Deluxe Detailing in Darlington a call and he will give you some honest advice on how best to proceed. He's rides a KTM 790 himself so he will understand what you're talking about.

Feel free to tell him that Mark passed his details on to you if you like.

Slowboathome

Original Poster:

4,461 posts

74 months

Friday 8th October 2021
quotequote all
Thanks for the advice. Much appreciated.

I've sent pics to a restorer and a couple of detailers to see what they say.

Cheers.

KTMsm

28,982 posts

293 months

Friday 8th October 2021
quotequote all
I deal in bikes - post up a few pics and I can tell you what I'd do (if you want to tackle it)

I replace simple bolts with stainless but it's amazing the difference a dremel clone with a wire brush makes, followed by a wipe over with ACF or a touch up with paint

If you're paying by the hour it adds up, to clean up a tatty bike can take me a full day

Biker9090

1,891 posts

67 months

Friday 8th October 2021
quotequote all
Where is the rust?

I'd just have any major parts powdercoated and replace the bolts with titanium or ss.