k jetronic hose

[TVR by BVR]

I am looking for the flexible hose between the intake plenum and the fuel distributor Tasmin 2.8I, I believe that they are the same as
the ones from Capri, Granada, etc, but I can't find one, helpppppppppp

[IamWedgend]

These are surprisingly hard to get hold of - I ended up just patching mine.

But some folk such as mr Ziga replaced it entirely with a more modern set up - run a search in the forum and you should find some examples.

[LLantrisant]

not available anymore new

you can use a 45 degree silicone-hose with ~70mm ID

Edited by LLantrisant on Thursday 8th April 21:34

[TVR by BVR]

Ok thanks for the info, I never thought about the silicone hose, good idea.

[aka_kerrly]

Have you got a Pirtek local to you? https://www.pirtek.co.uk/

They've saved me a few times when working with mk2 Golf GTIs that run kjet. The braided kjet lines to fit from the fuel pump to the accumulator and from the metering head to the warm up regulator cost around £55 for 4 hoses with new fixings so you might be surprised how relatively cheap/easy it could be:-)