What make and model Trolley jack do you use with your Aston

[Moviestar]

Hi Guys,
Looking for a new low entry trolley jack so what ones do you guys use?

Any recommendations would be very helpful.

thanks in advance

[ian448]

Use a 3 ton low profile trolley jack from Sgs engineering , very sturdy / well made and fits perfectly with a hockey puck

[john ryan]

The Machine Mart, low profile, 2 tonne, quick lift works fine on V8V. CTJ2QLP @ £144

[davek_964]

Costco one - fine for all my cars

[Dewi 2]

I use this Sealey branded low entry jack.
Beautifully made and looks like a work of art, perhaps appropriate for an Aston Martin.
One snag though. If you use jacking point pads, the jack is slightly too high.
Need to first drive the car up on half inch timbers.

[JonnyCJ]

ian448 said:

Use a 3 ton low profile trolley jack from Sgs engineering , very sturdy / well made and fits perfectly with a hockey puck

One of these - best tool in the workshop

[steveamv8]

Halfords Low profile two ton Job done

[LTP]

Another shout-out for the SGS low-profile jack. Brilliantly-engineered bit of kit and British-made too.

[phumy]

LTP said:

Another shout-out for the SGS low-profile jack. Brilliantly-engineered bit of kit and British-made too.

And yet another shout for the SGS low entry jack

[xstaticx]

I ended up with the Draper 31481 Low Profile Quick Lift Trolley Jack, mainly due to the 500mm lifting height and 72mm minimum. It has a large flat lifting pad too.

[thriftwood]

I went for this one - nice and low and lifts quickly. The saddle isn't removable if that's important to you.
It's currently on offer too
https://cjautosheywood.co.uk/product/3-ton-low-pro...

[Del1970]

xstaticx said:

I ended up with the Draper 31481 Low Profile Quick Lift Trolley Jack, mainly due to the 500mm lifting height and 72mm minimum. It has a large flat lifting pad too.

Exactly the same one for me. Same reasons too

[leman600]

Halfords Advanced 2 Tonne Low Profile Trolley Jack 657305
Super low and well made. Really works well for our cars with the specialist puks on this forum.
If in the AA claim 10% with the card or app.

[paulrog1]

I've got the Halfords Advanced trolley jack, very well made and works a treat -

https://www.halfords.com/tools/garage-workshop/axl...

[Simon.b]

Del1970 said:

xstaticx said:

I ended up with the Draper 31481 Low Profile Quick Lift Trolley Jack, mainly due to the 500mm lifting height and 72mm minimum. It has a large flat lifting pad too.

Exactly the same one for me. Same reasons too

That looks exactly the same as my SGS.

[LTP]

Simon.b said:

That looks exactly the same as my SGS.

Probably because Draper now source rather than make. But it can't be SGS because it's blue . Draper own-brand by SGS? or reverse engineered in China?

[Brave Fart]

I use a Weber WDK20 and it has no problem fitting under my V8 Vantage.
Cracking bit of kit, built like a tank and will probably outlive me.
Not cheap, but not silly money either.
https://www.weberuk.com/shop/trolley-jacks/standar...

[Moviestar]

Cheers Guys looks like the SGS is the one was really looking for a Sealey but it does not appear they have one low enough without having to raise the car slightly first.

[milu]

I have a couple. One of which is a sealey,2.5t. Super low and goes under no problem

[Moviestar]

milu said:

I have a couple. One of which is a sealey,2.5t. Super low and goes under no problem

Great cheers for that do you have a model number please so I can take a look - Much appreciated.