Ducati Bursi Evolution 999 build

[final_edition]

Starting with the above frame, I managed to convince a friend to sell, after many years of nagging him to let me buy it.

The frame was then mated with an ex GSE 109RS engine.

Some pics to get going...

[final_edition]

[rodericb]

Oh wow. How many of those Bursi frames exist? They had one on their website for a while, a few years ago now.

[StuB]

Oh nice thread to follow.

So what's the plan for this thing?

With great DNA, like the frame and RS motor, I do hope it's not destined for garage queen.

[final_edition]

StuB said:

Oh nice thread to follow.

So what's the plan for this thing?

With great DNA, like the frame and RS motor, I do hope it's not destined for garage queen.

It will be my trackday bike

[final_edition]

Standard late swingarm fitted with Ohlins race shock and 749R linear rocker.


CNC Panigale widetrack yokes

[poo at Paul's]

So many people doing so many special things with Ducatis, but that's something pretty unusual and rare. Looking forward to see how this comes out.

[final_edition]

Managed to also obtain a Bursi rear frame and had it Xylan coated.



24 degree insert to get some trail back from the lower offset yokes.

[final_edition]

Ohlins 46mm Superbike forks. Had these a few years now.



Bikesport Developments bespoke loom.

[final_edition]

I use Microtec ECUs they are great bits of kit.



Bursi 998RS rad fitted. It proved to get in the way on the belt side and also couldn't come back far enough, so the wheel missed on suspension compression.

[final_edition]

Reg/rec moved to other side.

Nemesis TC unit also mounted.


Brembo ti piston calipers.

Have fitted Brembo Supersport discs for now. Have some SBK ones to fit later.

[final_edition]

1098RS rad proved to be the way to go for clearance issues.

Thermostat also fitted, as I have found that the system takes a while to get upto temp without one.



Bursi airbox lower was used but needed modifying to allow the fuel tank to clear the airbox lid.

[final_edition]

Getting there.

RS carbon seat unit fitted.

[Steve Bass]

nice

Mick is making the loom for my 1098RS/748R hybrid with Aim dash & logger with Microtech ECU & Nemesis TC....

Juts makes it look so right...

[StuB]

final_edition said:

Getting there.

RS carbon seat unit fitted.

Is this the current state of the build?

Looking impressive so far

[final_edition]

There is some more work done. Had it running. Needs dyno time .

Engine also has BSD gearbox. It will go to them for dyno set up.

The loom also incorporates the Aim Solo wiring.

[final_edition]

1098RS qa throttle.


Akro exhaust modded to fit.

If you have one of these or a 57mm Termi, you only need to make the manifolds. All the other pipework fits as is.

[final_edition]

Steve Bass said:

nice

Mick is making the loom for my 1098RS/748R hybrid with Aim dash & logger with Microtech ECU & Nemesis TC....

Juts makes it look so right...

I had this engine in a 748R, with 1098RS swingarm.



Close up of loom.

[final_edition]

I have also made some disc spacers for the discs, to fit the widetrack.

[final_edition]

Have sourced some original JHP/Lloyd's carbon fairings too