Any VCDS experts?

[Ray Singh]

I have just run VCDS using Ross Tech on my Audi A4 and discovered one malfunction as below:

Address 17: Instruments (J285) Labels:. 8T0-920-xxx-17.clb
Part No SW: 8K0 920 983 G HW: 8K0 920 983 G
Component: KOMBIINSTR. H35 0567
Revision: 00100000 Serial number: 61+55LD7G
Coding: 33A4100003012600010000
Shop #: WSC 06325 000 00000
VCID: 397E9AC8B0C9E9879E-806C

1 Fault Found:
00003 - Control Module
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 6
Fault Frequency: 1
Reset counter: 136
Mileage: 103914 km
Time Indication: 0
Date: 2019.07.29
Time: 19:38:07

Can anyone help me to identify what this means please?

[gregpot2000]

Hello - Please see below, I don't think is too serious, my advice would be to delete and see if it comes back. it sounds more like a glitch, unless you have changed some settings with VCDS?

1 Fault Found:
00003 - Control Module
005 - No or Incorrect Basic Setting / Adaptation - There is a setting that the car believes is missing or not set correctly.
Freeze Frame:
Fault Status: 01100101
Fault Priority: 6 - The fault is very low priority, the least serious and maybe a minor glitch
Fault Frequency: 1 The fault has occurred only once, the time and date of it are below

Reset counter: 136 -

This varies per fault, when the car has managed what failed successfully 136 times, the fault will delete itself, as it will believe it has been fixed

Mileage: 103914 km
Time Indication: 0
Date: 2019.07.29
Time: 19:38:07

Can anyone help me to identify what this means please?

[Ray Singh]

Thank you - I cleared all fault codes via the "Clear all DTC codes" but this one didnt go away.
I will try and clear via the specific controller next.

[catso]

Any use?

http://wiki.ross-tech.com/wiki/index.php/00003