Ultima interferes with FreeView box !
Ultima interferes with FreeView box !
Author
Discussion

menostig

Original Poster:

244 posts

262 months

Monday 9th May 2005
quotequote all
Yes, when I start it up, the neighbour reports picture break-up on digital TV. Does this mean my car has something odd in its electrics ?? Should I build a faraday cage around my garage :-?

cheers
Rog

DHGTR

1,196 posts

272 months

Monday 9th May 2005
quotequote all
tell your neighbour to stop moaning. why would he want a viewable picture when he cant hear it over the noise of your engine anyway.

menostig

Original Poster:

244 posts

262 months

Monday 9th May 2005
quotequote all
Turns out he just wants rides into work in it. But hey still interested in the electronic/radio noise it emits.

adequatespeed

87 posts

304 months

Monday 9th May 2005
quotequote all
if you have an MSD ignition, they are renowneed for being electrically noisy. Perhaps that is the source of the noise

FunkyNige

9,819 posts

304 months

Monday 9th May 2005
quotequote all
You can (or at least could) get filters to put in the line from the aerial to the TV that cut down interference from radios, etc. Don't know if they would work with digital TV though. IIRC they cost a couple of quid.

andygtt

8,345 posts

293 months

Monday 9th May 2005
quotequote all
the STACK dash in mine used to interfer with the radio reception despite a surpressor.

andynormancx

82 posts

313 months

Tuesday 10th May 2005
quotequote all
Freeview boxes are awful when it comes to picking up interferance. I used to live on a busy road in Streatham, every time a motorbike went past the picture would break up.

It got better once we changed from an indoor aerial to a decent loft mounted one.

The current Freeview boxes are better than the older OnDigital ones, but still suffer from this problem.

Tell him to get Sky...

silversix

258 posts

261 months

Tuesday 10th May 2005
quotequote all
Aerial filter won't help, as noise will be wide band. Filters only help to remove other discreet frequencies eg taxis etc. Need to supress the "noise" at source. Typically noise will come from ignition, but could be alternator arcing. I've got a feeling that car without metal bodywork would be harder to supress, as the earthed metal would normally cut down on the emitted RF. Baisically make sure that everything is earthed, and there are supressors (capacitors) fitted everywhere that there should be. (I used to look into interference for a living, so know a bit about it)

Adrian