Carbon vs aluminium Canyon
Discussion
Thinking about buying my first road bike and have narrowed it down to these two. What are the pros/cons of each as they both weigh the same however the carbon is £300 more.
https://www.canyon.com/en-gb/road/endurace/endurac...
https://www.canyon.com/en-gb/road/endurace/endurac...
Thanks
https://www.canyon.com/en-gb/road/endurace/endurac...
https://www.canyon.com/en-gb/road/endurace/endurac...
Thanks
Miocene said:
Weight seems to be the same at 8.5kg, so basically if you want a CF frame and lesser spec kit or alu frame and higher spec kit.
Depends what you'll use it for. Will it be every day, or something you can upgrade in the future?
It won't be used everyday, it will be a toy more than anything than can be upgraded when I need it to be. Any other suggestions other than the canyon bikes? Depends what you'll use it for. Will it be every day, or something you can upgrade in the future?
I'll just leave this here.....

I toyed with the 8.0, then decided as I was in at £1800, I may as well stretch to the 9.0, which is a kilo lighter again and £400 more...
Best decision I made and now I don't rue not splashing the extra cash....
As for the hydraulic brakes, no way would I spec a new bike with rim brakes, the braking is an order of magnitude better than rim brakes...
I toyed with the 8.0, then decided as I was in at £1800, I may as well stretch to the 9.0, which is a kilo lighter again and £400 more...
Best decision I made and now I don't rue not splashing the extra cash....
As for the hydraulic brakes, no way would I spec a new bike with rim brakes, the braking is an order of magnitude better than rim brakes...
I like aluminium. If I was spending big I would probably get carbon, but at the lower to mid range I trust aluminium more.
Rim brakes on a road bike for me too...I rode for an hour this evening and maybe used the brakes for 8 seconds in total. The other 59 minutes and 52 secs my rim brakes had less drag and weight than discs. Depends where and how you ride, for some discs might be a better choice.
I can also recommend Rose bikes, I've been riding a Rose Xeon RS for a couple of years. It is light, stiff, precise handling, comfortable and durable...
Rim brakes on a road bike for me too...I rode for an hour this evening and maybe used the brakes for 8 seconds in total. The other 59 minutes and 52 secs my rim brakes had less drag and weight than discs. Depends where and how you ride, for some discs might be a better choice.
I can also recommend Rose bikes, I've been riding a Rose Xeon RS for a couple of years. It is light, stiff, precise handling, comfortable and durable...
Then again... I moved from an aluminium rim braked Defy to a carbon disc braked Endurace and the Endurace is faster everywhere - on the flat, climbing, descending.
Then again it cost more than 3 times as much so it darned well should. The wheels were significantly lighter despite the braking method. The whole bike comes in at just over 7 kilos so I don't think its holding me back much.
Carbon tends to be lighter but dearer. Disc brakes tend to be better but heavier (and dearer). It's up to you to work out which is the best 'deal' for you.
Then again it cost more than 3 times as much so it darned well should. The wheels were significantly lighter despite the braking method. The whole bike comes in at just over 7 kilos so I don't think its holding me back much.
Carbon tends to be lighter but dearer. Disc brakes tend to be better but heavier (and dearer). It's up to you to work out which is the best 'deal' for you.
Gren said:
Then again... I moved from an aluminium rim braked Defy to a carbon disc braked Endurace and the Endurace is faster everywhere - on the flat, climbing, descending.
Then again it cost more than 3 times as much so it darned well should. The wheels were significantly lighter despite the braking method. The whole bike comes in at just over 7 kilos so I don't think its holding me back much.
Carbon tends to be lighter but dearer. Disc brakes tend to be better but heavier (and dearer). It's up to you to work out which is the best 'deal' for you.
I woul concur, regarding up hill, down hill and on the flat performance.....Then again it cost more than 3 times as much so it darned well should. The wheels were significantly lighter despite the braking method. The whole bike comes in at just over 7 kilos so I don't think its holding me back much.
Carbon tends to be lighter but dearer. Disc brakes tend to be better but heavier (and dearer). It's up to you to work out which is the best 'deal' for you.
Plus it's super comfy, 70 miles yesterday with no aches or pains.....a bit like riding my sofa!
wobert said:
I'll just leave this here.....

I toyed with the 8.0, then decided as I was in at £1800, I may as well stretch to the 9.0, which is a kilo lighter again and £400 more...
Best decision I made and now I don't rue not splashing the extra cash....
As for the hydraulic brakes, no way would I spec a new bike with rim brakes, the braking is an order of magnitude better than rim brakes...
Looks fantastic. I'm in the same boat re disc brakes. I've had a Dogma F8 with hydraulic disc brakes for over a year - the braking performance, in any weather condition, is an order of magnitude better than rim brakes - I'll never go back.I toyed with the 8.0, then decided as I was in at £1800, I may as well stretch to the 9.0, which is a kilo lighter again and £400 more...
Best decision I made and now I don't rue not splashing the extra cash....
As for the hydraulic brakes, no way would I spec a new bike with rim brakes, the braking is an order of magnitude better than rim brakes...
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff




