time keeping
Author
Discussion

Jag_NE

Original Poster:

3,339 posts

130 months

Tuesday 13th September 2016
quotequote all
Evening all, my brand new watch is loosing approx 3 seconds per day, measured against the GMT website. Assuming my source is robust, is this reasonable or not? My immediate thought was that it was not acceptable for an 8k watch but a work colleague thinks it is!

Thanks in advance.

Squadrone Rosso

3,693 posts

177 months

Tuesday 13th September 2016
quotequote all
If it's an automatic, very acceptable.

Jag_NE

Original Poster:

3,339 posts

130 months

Tuesday 13th September 2016
quotequote all
Squadrone Rosso said:
If it's an automatic, very acceptable.
Wow, you can tell I an amateur! I presumed expensive = good time keeping!

warren182

1,092 posts

240 months

Tuesday 13th September 2016
quotequote all
Jag_NE said:
Wow, you can tell I an amateur! I presumed expensive = good time keeping!
I think you're after a casio wink

CardShark

4,262 posts

209 months

Tuesday 13th September 2016
quotequote all
Squadrone Rosso said:
If it's an automatic, very acceptable.
This.

OP - if you take your watch off at night leave the watch in different positions (dial up/down or crown up/down for example) and see if that then "corrects" the accuracy. Even though the parts are very small gravity still affects the way a mechanical watch runs - a well built, designed and calibrated movement will vary less, on average, than a something cheaper. As it is if your mechanical watch is 3sec out every 24h, there are 86,400 seconds in a day so 3sec isn't so bad wink

Out of interest, what watch is it? Is it chronometer rated?


Edited by CardShark on Tuesday 13th September 21:12

Jag_NE

Original Poster:

3,339 posts

130 months

Tuesday 13th September 2016
quotequote all
CardShark said:
This.

OP - if you take your watch off at night leave the watch in different positions (dial up/down or crown up/down for example) and see if that then "corrects" the accuracy. Even though the parts are very small gravity still affects the way a mechanical watch runs - a well built, designed and calibrated movement will vary less, on average, than a something cheaper. As it is if your mechanical watch is 3sec out every 24h, there are 86,400 seconds in a day so 3sec isn't so bad wink

Out of interest, what watch is it? Is it chronometer rated?


Edited by CardShark on Tuesday 13th September 21:12
I think so, it's a Breitling chronomat, certified chronometer

PJ S

10,842 posts

257 months

Tuesday 13th September 2016
quotequote all
^
Then it’s within COSC spec – -4/+6 per day.

thebraketester

15,822 posts

168 months

Tuesday 13th September 2016
quotequote all
3s slow day is pretty good. I'd rather it be 3s fast though.

CardShark

4,262 posts

209 months

Tuesday 13th September 2016
quotequote all
Jag_NE said:
I think so, it's a Breitling chronomat, certified chronometer
I think that all new Breitlings are now rated as chronometers yes

Jag_NE

Original Poster:

3,339 posts

130 months

Tuesday 13th September 2016
quotequote all
Thanks all