M36T2 Bypass

[Basil Brush]

Does anyone have details of the pin layout for the plug on the M36T2 immobiliser? The one on my Tuscan has failed, I think due to sitting with the battery disconnected for a while. The fob still turns off the alarm and unlocks the car but the led on the immobiliser socket doesn't flash and it will not disarm with either the fob or touch key.

I'm going to replace the whole system from Abacus but really need to get the car started this weekend if possible.

[Steve_D]

PM sent

Steve

[Basil Brush]

Thanks Steve.

[Johng17]

Hello
I'm also having to bypass a Meta M36T2 alarm on an old motorhome. I think the internal battery has gone and a new alarm would be worth more than the van so Im going to have a go myself. If you could let me know the right connections to bridge Id be very grateful.
Thanks John

[Penelope Stopit]

Johng17 said:

Hello
I'm also having to bypass a Meta M36T2 alarm on an old motorhome. I think the internal battery has gone and a new alarm would be worth more than the van so Im going to have a go myself. If you could let me know the right connections to bridge Id be very grateful.
Thanks John

Follow the cables from the immobiliser and all will be revealed

[CHICISLES]

Steve_D said:

PM sent

Steve

I saw your reply about diagram for M36T2 alarm. Can you send the details please

regards

Charles

[Steve_D]

CHICISLES said:

Steve_D said:

PM sent

Steve

I saw your reply about diagram for M36T2 alarm. Can you send the details please

regards

Charles

As a new member you won't be able to message me.
i've tried to message you but it looks like you have not enabled PM.

Steve

[gary8848]

hi there
Has anyone got the pin layout so i can get my car started, the imm has gone and im now stuck, without trial and error its hard work
meta t36

[parfy21]

Bumping an old thread but having the same issue. I’ve got my dad’s Cerbera and he left it unused for a good while with a dead battery. Alarm works but from what I can feel the immobiliser is dead. It’s going for its MOT Friday so I need to get it running by then!

[Byker28i]

You need to speak to someone like HF Solutions because noones going to post on the internet where and how to bypass the immobiliser.
ttps://www.hf-solutions.co.uk/

Note, it has all black wires going to it, there's no colour coding