997.2 GT3 RS wheels on 997.2 GTS?
Discussion
I really fancy a set of 997.2 GT3 RS wheels on my 997.2 GTS but has anyone else already done it?
Like most my GTS has the OE centre-locks but in my opinion they just sit too far inside the arches. On a conventional 5-stud car I would bolt on a set of Eibach or H&R spacers but not possible with the centre-locks...
So after doing some research I quite fancy fitting a set of 997.2 GT3 RS wheels to it as not only does the wheel (in my opinion) look better than the GTS wheel but the different offset and width would put the front and rear wheel +15mm further out which I think would look perfect.
The 997.2 GT3 8.5x19 front wheel would put the front out +3mm but the wider 9x19 GT3 RS wheel with a slightly different offset would give me +15mm. On the rear the RS 12x19 wheel would also give me +15mm.
So i'm looking for a set of used 997.2 GT2 or 3 RS wheels (condition not so important as will be refurbished in different colour) if anyone has or knows of a set at sensible money?
Chris
Like most my GTS has the OE centre-locks but in my opinion they just sit too far inside the arches. On a conventional 5-stud car I would bolt on a set of Eibach or H&R spacers but not possible with the centre-locks...
So after doing some research I quite fancy fitting a set of 997.2 GT3 RS wheels to it as not only does the wheel (in my opinion) look better than the GTS wheel but the different offset and width would put the front and rear wheel +15mm further out which I think would look perfect.
The 997.2 GT3 8.5x19 front wheel would put the front out +3mm but the wider 9x19 GT3 RS wheel with a slightly different offset would give me +15mm. On the rear the RS 12x19 wheel would also give me +15mm.
So i'm looking for a set of used 997.2 GT2 or 3 RS wheels (condition not so important as will be refurbished in different colour) if anyone has or knows of a set at sensible money?
Chris
Gassing Station | 911/Carrera GT | Top of Page | What's New | My Stuff