Disc braked Wheels
Discussion
I have just purchased a Wilier Cento Uno Disc and have the Mavic Aksium wheel. I These were an upgrade, but already i am finding them a little too heavy.
So, the next on the shopping list is ...... you guessed it.... new wheels.
Mavic upgrades are 1000 euro - so I was wondering are there any other manufacturers I should be looking at?
Is building a wheel a good option?
Any thoughts welcomed!
I have some fast forward 40mm disk wheels. Very impressed. Just did your of Flanders on them and they were faultless.
http://www.ffwdwheels.com/products/wheels/road-tub...
Mine are clinchers.
I also have done bontranger affinity elite wheels. They are very good also. Lighter than the FF
http://www.bontrager.com/model/12012
http://www.ffwdwheels.com/products/wheels/road-tub...
Mine are clinchers.
I also have done bontranger affinity elite wheels. They are very good also. Lighter than the FF
http://www.bontrager.com/model/12012
I run Kinesis Crosslights on my CX and would throw them on a disc road bike in a heartbeat.
The trend on road bikes is towards wider rims anyway.
1550g for the pair. I weighed mine when I got them.
Light, spin beautifully, almost indestructible (almost - I had one trued after a 25mph crash on the road, a spoke nipple came loose when I hit a BIG rock on a trail. Either of those would have mashed any wheel)
Did I mention in they are just over £250?
Total bargain and couldn't recommend them higher
The trend on road bikes is towards wider rims anyway.
1550g for the pair. I weighed mine when I got them.
Light, spin beautifully, almost indestructible (almost - I had one trued after a 25mph crash on the road, a spoke nipple came loose when I hit a BIG rock on a trail. Either of those would have mashed any wheel)
Did I mention in they are just over £250?
Total bargain and couldn't recommend them higher
thanks for the input.
Looking into those options - am bringing the bike back to the shop to get everything checked over tomorrow.
I was descending on some pretty ropey surfaces yesterday and I am still not as confident in the bike as I am in my Ali/Carbon forked merida. my cycling buddy was way way ahead of me...rage!
great to get the early morning riding is back for the season!
Looking into those options - am bringing the bike back to the shop to get everything checked over tomorrow.
I was descending on some pretty ropey surfaces yesterday and I am still not as confident in the bike as I am in my Ali/Carbon forked merida. my cycling buddy was way way ahead of me...rage!
great to get the early morning riding is back for the season!
The Kinesis wheels are good, but the tricky bit is finding them. They only produce them in limited numbers and when I asked about some in January, I was quoted March April time...maybe 
You can get some Chinese carbon clinchers on Ebay for around £300 delivered. I've never tried them though.

You can get some Chinese carbon clinchers on Ebay for around £300 delivered. I've never tried them though.
bakerstreet said:
The Kinesis wheels are good, but the tricky bit is finding them. They only produce them in limited numbers and when I asked about some in January, I was quoted March April time...maybe 
Wiggle have them in stock and have since I bought some last month. 
I've done less than 200 miles on them but am happy so far. I'm not that bothered about the weight but if they’re more robust than the set that came on the bike I’ll be pleased.
donfisher said:
bakerstreet said:
The Kinesis wheels are good, but the tricky bit is finding them. They only produce them in limited numbers and when I asked about some in January, I was quoted March April time...maybe 
Wiggle have them in stock and have since I bought some last month. 
I've done less than 200 miles on them but am happy so far. I'm not that bothered about the weight but if they’re more robust than the set that came on the bike I’ll be pleased.
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff



) plus the weight of panniers, laptop, laptop bag, spare clothes etc, etc...