Radiator Fan -Twin 12-inch or Single 16-inch
Radiator Fan -Twin 12-inch or Single 16-inch
Author
Discussion

mk1fan

Original Poster:

10,902 posts

254 months

Thursday 9th April 2015
quotequote all
As title. Twin 12-inch fans or a single 16-inch fan.

Original push single fan coped fine until the remodelling. Twin set up too much?

phillpot

17,508 posts

212 months

Thursday 9th April 2015
quotequote all


As said, standard single fan should cope if all cooling system in good order, mine was fine on a virtually stationary M25 coming back from Eurotour one year in unusually (for England) hot weather.


But maybe twin set up would give a little "insurance" scratchchin

v8s4me

7,275 posts

248 months

Thursday 9th April 2015
quotequote all
This was what I did when I couldn't get hold of a replacement single fan



The 'H' shaped frame was welded to the rad mounting frame. I was going to rig up a separate switch for one of them but never got around to it. Oddly, since these were fitted, they seem to be on most of the time whereas the original big single fan only came on when the temperature gauge started to rise in traffic. Same size rad and otter switch as before. Odd.

Alan461

853 posts

160 months

Thursday 9th April 2015
quotequote all
Two stage operation with twin fans seems like a good idea if you have the oportunity.

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

SJS357

1,505 posts

185 months

Friday 10th April 2015
quotequote all
Hidden twin set up has worked brilliantly for us.
Just mounted underneath.







Edited by SJS357 on Friday 10th April 06:31

Griffinr

1,017 posts

203 months

Friday 10th April 2015
quotequote all
Very neat arrangement Simon, what size are those?
Rob.

mk1fan

Original Poster:

10,902 posts

254 months

Friday 10th April 2015
quotequote all
I'll guess 12-inch.

I have considered having dual switching but time constraints ruled it out.

That said, Samy is now not going to be ready as scheduled - delays with the bespoke items - so may revisit this.

Very neat install on the V8S. Was hoing for the rad mount plates to arrive today but, alas, they haven't.

v8s4me

7,275 posts

248 months

Friday 10th April 2015
quotequote all
Have a think about fitting a stone guard while you're at it. You can make one very easily out of 1/4" chicken wire and hold it in place using little 'U' bolts and the rods which the held the original fan in place.

SJS357

1,505 posts

185 months

Saturday 11th April 2015
quotequote all
Sorry for delayed reply Rob
Yep 2 x 12".

AMDBSTony

1,128 posts

196 months

Saturday 11th April 2015
quotequote all
Alternative mounting idea on my car if it helps?


mk1fan

Original Poster:

10,902 posts

254 months

Saturday 11th April 2015
quotequote all
I think I'll copy your placement of the horns.

TVRees

1,087 posts

141 months

Saturday 11th April 2015
quotequote all
Re. Placement of the horns :: They'll be nice'n'loud there, but wont they get battered with stones ?

mk1fan

Original Poster:

10,902 posts

254 months

Sunday 12th April 2015
quotequote all
On Samy? No.