freakin freezin in here!

[millyad]

had the tuscan back from a gearbox rebuild (two months) and now have no heat from my heater, still get air flow and little change noises when turning heater knob but no heat, tried fuses and black box connection still no heat.
any clues anyone?

[NCE 61]

sounds like the heater control unit. Have you tried switching the heater fan off & back on again.

[millyad]

what do you mean pushing the button in and out again?

[NCE 61]

millyad said:

what do you mean pushing the button in and out again?

Yes

[evostick]

Don't know if this helps but this is what I have to do to get warm air!

1. push the button in to turn heater on.
2. turn the temperature to hot.
3. turn the airflow full blast.
4. turn the temperature to cold.
5. turn the heater off.
6. repeat above until it works!!

After 2 or 3 attempts this always works.

Eve

[s2art]

evostick said:

Don't know if this helps but this is what I have to do to get warm air! 1. push the button in to turn heater on. 2. turn the temperature to hot. 3. turn the airflow full blast. 4. turn the temperature to cold. 5. turn the heater off. 6. repeat above until it works!! After 2 or 3 attempts this always works. Eve

The 'heater' button, is that the one which engages/disengages the air-con? Or is there yet another button somewhere?
I have the same problem.

[s2art]

evostick said:

Don't know if this helps but this is what I have to do to get warm air! 1. push the button in to turn heater on. 2. turn the temperature to hot. 3. turn the airflow full blast. 4. turn the temperature to cold. 5. turn the heater off. 6. repeat above until it works!! After 2 or 3 attempts this always works. Eve

The 'heater' button, is that the one which engages/disengages the air-con? Or is there yet another button somewhere?
I have the same problem.

[s2art]

evostick said:

Don't know if this helps but this is what I have to do to get warm air! 1. push the button in to turn heater on. 2. turn the temperature to hot. 3. turn the airflow full blast. 4. turn the temperature to cold. 5. turn the heater off. 6. repeat above until it works!! After 2 or 3 attempts this always works. Eve

The 'heater' button, is that the one which engages/disengages the air-con? Or is there yet another button somewhere?
I have the same problem.

[NCE 61]

s2art said:

evostick said: Don't know if this helps but this is what I have to do to get warm air! 1. push the button in to turn heater on. 2. turn the temperature to hot. 3. turn the airflow full blast. 4. turn the temperature to cold. 5. turn the heater off. 6. repeat above until it works!! After 2 or 3 attempts this always works. Eve The 'heater' button, is that the one which engages/disengages the air-con? Or is there yet another button somewhere? I have the same problem.

You must be still shaking from the cold & hit the enter button 3 times Try pressing the fan button on/off

[alans]

had the same problem on mine, it turned out to be the stepper motor which operates the flap had jammed.

Alan

[evostick]

I don't have air-con in mine so for me the "heater" button is lower one of the 2. The one that controls the volume of airflow not the temperature.

Eve