Cleaning my helmet
Discussion
I mean really cleaning my helmet. It stinks - as soon as I get a bit hot and sweaty, the sweat that runs down smells awful. I've replaced and washed all the soft pads but it seems to me that the accumulation of old sweat within the helmet itself is the problem. I don't know if it's likely to be soaked into the polystyrene or just gathered and dried inside the shell, waiting to be rehydrated by my next excursion...
It's so bad I don't wear it unless I'm going out for a "proper" ride - I commute sans casque every day.
Basically, can I wrap it in a t shirt, stick it in one of those net laundry bags and put it in the washing machine or is there a particular technique?
It's so bad I don't wear it unless I'm going out for a "proper" ride - I commute sans casque every day.
Basically, can I wrap it in a t shirt, stick it in one of those net laundry bags and put it in the washing machine or is there a particular technique?
If you’ve washed the pads properly then it’ll be the straps – take it in the shower with you and give the whole thing a good wash – then give the straps a good going over with some of the mrs’ expensive shampoo. Do that a couple of times or until it stops smelling.
Having had this problem a few times a cycling cap or skullcap underneath helps stop this pretty well IME.
Having had this problem a few times a cycling cap or skullcap underneath helps stop this pretty well IME.
Might be worth soaking in something like Milton sterilising, it's the bacteria causing the issue.
http://www.milton-tm.com/en/consumer/products/ster...
http://www.milton-tm.com/en/consumer/products/ster...
- Take a bucket of water and bung in some washing powder;
- Stir;
- Add helmet;
- Add weight to helmet to keep it in the water;
- Leave to soak;
- Occasionally rub straps with fingers and leave to soak for longer making sure you move the plastic bits so you can get to the whole strap;
- Hang up to dry
I tend to do this every couple of months to the commute helmet.
- Stir;
- Add helmet;
- Add weight to helmet to keep it in the water;
- Leave to soak;
- Occasionally rub straps with fingers and leave to soak for longer making sure you move the plastic bits so you can get to the whole strap;
- Hang up to dry

I tend to do this every couple of months to the commute helmet.
How old is the lid? They're meant to get recycle into decorative hanging baskets once they hit two years old as the accumulation of minor knocks they pick up progressively degrades the polystyrene structure- allegedly, anyway.
If it's only a year or so old then a good wash in the sink and then maybe stick it in the freezer overnight to kill any bacteria the scrub didn't get to?
If it's only a year or so old then a good wash in the sink and then maybe stick it in the freezer overnight to kill any bacteria the scrub didn't get to?
bigdom said:
Might be worth soaking in something like Milton sterilising, it's the bacteria causing the issue.
http://www.milton-tm.com/en/consumer/products/ster...
Fantastic advice, thanks. http://www.milton-tm.com/en/consumer/products/ster...

Tried washing it in non bio washing stuff last week, it was ok but still, on a long ride, the lingering stink of old rides returned.
Bought some Milton tablets at the chemist (£1.49 for a box, so cheap as), filled a suitable container, dropped a tablet in, weighed down helmet so it was submerged and left it all evening. Popped it in airing cupboard to dry, took it out last night and it's perfect. Smells faintly of sterilising fluid (a not unpleasant, clean smell) rode in this morning, no nasty stuff leeching out of the straps/ shell / pads and running down my face. Result.
Highly recommend this method.
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff




)