Garmin brain fart
Discussion
I just uploaded my commute in this morning and the Garmin has recorded it in a very strange way!
It has recorded what would seem to be a realistic distance but the route is 'as the crow flies'. Any one else had this?
It's a Garmin 510 by the way.
Steve
Edit to remove route as it shows where I work!
It has recorded what would seem to be a realistic distance but the route is 'as the crow flies'. Any one else had this?
It's a Garmin 510 by the way.
Steve
Edit to remove route as it shows where I work!
Edited by Steve vRS on Tuesday 27th May 09:05
Weird stuff happens to my Edge 500 when it's paused.
I stopped at the tailor's shop on barracks to drop off some work I needed doing, so paused my Garmin. I propped it up for about half an hour, then restarted it and completed my ride.
On uploading the data, I found that the bike had apparently been ridden in random zig-zags across the neighbouring sports pitches while I was indoors, despite it having been locked up!
I stopped at the tailor's shop on barracks to drop off some work I needed doing, so paused my Garmin. I propped it up for about half an hour, then restarted it and completed my ride.
On uploading the data, I found that the bike had apparently been ridden in random zig-zags across the neighbouring sports pitches while I was indoors, despite it having been locked up!
Steve vRS said:
It was 11miles as the crow flies!
How did it record a speed and distance though as on my CX bike I haven't got a cadence sensor?
I don't mean this to sound rude, and if it was a rhetorical question, I apologise in advance, but here goes...How did it record a speed and distance though as on my CX bike I haven't got a cadence sensor?
My guess is that the Garmin picked the last known point before it lost GPS connection, and the point where it picked it back up again. Then it drew a straight line between the two points. Each exchange of data with the GPS satellite is 'time stamped', so it did the maths to work out how long it took to travel between those known points. Then the unit/post ride software divided the distance travelled by the time it took to travel, and came up with a speed.
yellowjack said:
I don't mean this to sound rude, and if it was a rhetorical question, I apologise in advance, but here goes...
My guess is that the Garmin picked the last known point before it lost GPS connection, and the point where it picked it back up again. Then it drew a straight line between the two points. Each exchange of data with the GPS satellite is 'time stamped', so it did the maths to work out how long it took to travel between those known points. Then the unit/post ride software divided the distance travelled by the time it took to travel, and came up with a speed.
I don't think so as the route I rode was a loop of 16-17miles and the direct route I can ride to work is about 11miles.My guess is that the Garmin picked the last known point before it lost GPS connection, and the point where it picked it back up again. Then it drew a straight line between the two points. Each exchange of data with the GPS satellite is 'time stamped', so it did the maths to work out how long it took to travel between those known points. Then the unit/post ride software divided the distance travelled by the time it took to travel, and came up with a speed.
Steve
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff


