Discussion
Contact Steve Driver on 01254 670121 and say you want parts BRT PUJ2001 (greased)or BRT PUJ2002 (ungreased). Price was £16.25+vat each last year. Steve has been very helpful on researching parts for S types. Just don't mention S type servos, an absolute nightmare.
Have you got the shaft out? If not, then there is a 'trick' to doing it.
Have you got the shaft out? If not, then there is a 'trick' to doing it.
Indeed it does have to be the right landrover there are loads of different ones. The part numbers I gave above are aftermarket ones but correct for the S shaft.
The trick, for anybody who want to make a note, is to remove the lower diff mounting and pull the diff front DOWN, then slide the shaft back ABOVE the diff then down at the front. Tight but OK on mine
The trick, for anybody who want to make a note, is to remove the lower diff mounting and pull the diff front DOWN, then slide the shaft back ABOVE the diff then down at the front. Tight but OK on mine
Gassing Station | S Series | Top of Page | What's New | My Stuff