Front indicator dimensions

[Barkychoc]

Has anyone got these or could they measure one?

[phillpot]

What do you need Chris, lens dimensions or the size of the hole it fits in or both or more?????

( you can delete your duplicate post )


Can get one out the loft in a minute and see if I can find a ruler




got an old one out the loft and found a ruler.....

lens is 180 x 72mm

black bit is 165 x 51mm

total depth is 75mm

depth of black bit is 65mm

the lens (looking from the end) rises about 5mm







HTH, what are you up to

Edited by phillpot on Thursday 28th February 18:40

[Barkychoc]

Found some commercial LED indicators, will look at sizes and report back.

[Barkychoc]

Whats distance between mounting holes?

[Barkychoc]

Download catalogue and look at page 22.

http://www.ledautolamps-uk.com/

Bit longer than std indicators and would require additional load as they don't draw enough current.

They are in Sutton Coldfield so maybe worth a call to see if its possible to look at one Phillpot?

Edited by Barkychoc on Thursday 28th February 19:49

[phillpot]

Barkychoc said:

Download catalogue and look at page 22.

What catalogue

Barkychoc said:

distance between centres?

147mm

[Barkychoc]

Why the link above of course ;-)

[Barkychoc]

Look at these I'm really tired tonight grey matter not functioning.

http://www.ledautolamps-uk.com/productshow.php?ima...

I thought the longer model (200) just might work.

They are available with chrome or black trim where have I seen that before?

Edited by Barkychoc on Thursday 28th February 22:07

[Barkychoc]

I am bumping this up as the duplicate thread I said to ignore is doing better than this one