Discussion
Picked up my new van on tuesday afternoon, its a 2011 1.6t Caddy.
Spent weds getting it ready for working again thurs!
As she started the morning!

Untitled by lukegodbold, on Flickr
I stripped out the ply lining ready to be trimmed how i wanted and to clean underneath.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Much better!

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
I had already got some van carpet to do the trimming of the walls and some flooring to do the base.

Untitled by lukegodbold, on Flickr
First side coming together

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Door panel

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Second side with spring clips fitted to hold bottles.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Need to finish the edges with some trim to match the otherside when it comes out again at the weekend for a for final touches.
Then got the tank in.

Untitled by lukegodbold, on Flickr
Swopped the orange indicators for some osram bulbs i have had for years and have been in 3 different cars!

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
I swopped the wheels over as i kept the wheels from the last van.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Had a bit of spare time this afternoon so did a few little bits.
First i fitted my window guards, just done with screws till my new nut riveter arrives then will be fitted properly. Also swopped my plates to my less legal ones

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Put the side rail cover on from the old van, it seems to be a very slighty different shade so will get it painted when i get the mirrors done.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Last job as i was freezing from being outside all day was to change the rear indicator bulbs to chrome ones.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Hopefully I can get the new headunit and bluetooth sorted tomorrow.
Spent weds getting it ready for working again thurs!
As she started the morning!

Untitled by lukegodbold, on Flickr
I stripped out the ply lining ready to be trimmed how i wanted and to clean underneath.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Much better!

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
I had already got some van carpet to do the trimming of the walls and some flooring to do the base.

Untitled by lukegodbold, on Flickr
First side coming together

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Door panel

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Second side with spring clips fitted to hold bottles.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Need to finish the edges with some trim to match the otherside when it comes out again at the weekend for a for final touches.
Then got the tank in.

Untitled by lukegodbold, on Flickr
Swopped the orange indicators for some osram bulbs i have had for years and have been in 3 different cars!

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
I swopped the wheels over as i kept the wheels from the last van.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Had a bit of spare time this afternoon so did a few little bits.
First i fitted my window guards, just done with screws till my new nut riveter arrives then will be fitted properly. Also swopped my plates to my less legal ones


Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Put the side rail cover on from the old van, it seems to be a very slighty different shade so will get it painted when i get the mirrors done.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Last job as i was freezing from being outside all day was to change the rear indicator bulbs to chrome ones.

Untitled by lukegodbold, on Flickr

Untitled by lukegodbold, on Flickr
Hopefully I can get the new headunit and bluetooth sorted tomorrow.
Thanks for the comments, it is a massive improvement over my previous caddy!
Leesa - I have got accounts at TPS, GSF, ECP but if you can get parts cheap then that would be handy!
Want to get the mirrors colour coded at some point and have got some Golf GT seats to go in when they get back from the trimmer.
Ewolg- my mate normally sorts my vans out, but if I can't get hold of home to sort it will be in touch! A deal is always an option!
Leesa - I have got accounts at TPS, GSF, ECP but if you can get parts cheap then that would be handy!
Want to get the mirrors colour coded at some point and have got some Golf GT seats to go in when they get back from the trimmer.
Ewolg- my mate normally sorts my vans out, but if I can't get hold of home to sort it will be in touch! A deal is always an option!

Looks nice mate, would love a black one but would never get any work done as I would be permantly cleaning it!!
The 1.6t is such an improvement over the crappy 2.0sdi I had in the last one, imagine the 2.0tdi shifts! I will be getting a revo remap on mine at some point that should see it pushing around 135bhp and 220lbft.
The 1.6t is such an improvement over the crappy 2.0sdi I had in the last one, imagine the 2.0tdi shifts! I will be getting a revo remap on mine at some point that should see it pushing around 135bhp and 220lbft.
W4X LG said:
Looks nice mate, would love a black one but would never get any work done as I would be permantly cleaning it!!
The 1.6t is such an improvement over the crappy 2.0sdi I had in the last one, imagine the 2.0tdi shifts! I will be getting a revo remap on mine at some point that should see it pushing around 135bhp and 220lbft.
The remap will certainly improve things!The 1.6t is such an improvement over the crappy 2.0sdi I had in the last one, imagine the 2.0tdi shifts! I will be getting a revo remap on mine at some point that should see it pushing around 135bhp and 220lbft.
Where did you get the rail cover?
Is it OEM?
Gassing Station | South Coast | Top of Page | What's New | My Stuff