Wrong size caliper mount or just plain weird?
Discussion
Hi all, I got some ~15y.o. Marzocchi Atoms fitted to my bike today but there was a slight problem when I came to reattach the brakes:

As you can see, the caliper is only half on the disc (a 160mm rotor) at best. Is this mount meant for a 180mm rotor as there seems to be about 10mm of free space from disc edge to the furthest point in the caliper body.

As you can see, the caliper is only half on the disc (a 160mm rotor) at best. Is this mount meant for a 180mm rotor as there seems to be about 10mm of free space from disc edge to the furthest point in the caliper body.
you just need a 180mm rotor or 160mm adaptor. I'd go with the bigger disc, £11 job done!
http://superstar.tibolts.co.uk/index.php
http://superstar.tibolts.co.uk/index.php
I've just realised I've been extremely speshul...
Whilst I was having the forks fitted, I had taken both calipers off the mountings and removed the adaptors and pads, to clean the road dirt and brake dust and other crap off them. Having gone and ordered a 180mm disc from CRC, I went to refit the rear caliper. Thats odd, methinks. Why wont it go on properly?
Yep... I had the rear mount adaptor on the front caliper and vice versa. Switching them round, the front one now fits properly over the 160mm disc.
I am a total idiot

I hope CRC can cancel orders!
Whilst I was having the forks fitted, I had taken both calipers off the mountings and removed the adaptors and pads, to clean the road dirt and brake dust and other crap off them. Having gone and ordered a 180mm disc from CRC, I went to refit the rear caliper. Thats odd, methinks. Why wont it go on properly?
Yep... I had the rear mount adaptor on the front caliper and vice versa. Switching them round, the front one now fits properly over the 160mm disc.
I am a total idiot

I hope CRC can cancel orders!
Edited by mat777 on Wednesday 30th January 01:48
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff



