Help Needed

[Alan Whitaker]

Hi All,
As search is down again, I need some help with the door motors, a bit back I got some electric window motors from Norman, I took some pictures of the door fixings but seam to have lost them. Originally I had wind up so the doors don't have any fixing holes for the motors, has anybody any pictures of the motors mounted into the doors i.e.. showing how they mount.

Alan

[motomatchless]

Hello Alan, I hope these photos usefull.
Happy new year to you and all the S friends.
PS; clic the image and you will see another and beter photo.

Edited by motomatchless on Monday 31st December 17:00

[Alan Whitaker]

Hi
Thanks but not a lot of help, I was thinking of full door pictures with the door card off.

Alan

[Gerald-TVR]

Alan if you can wait a few days I can photograph the doors that the bits came from as I still have them in Birmingham and possibly do a 'rubbing' onto a piece of paper, the doors are off an S3 so can't just do a straight swop

Norman

[Alan Whitaker]

Hi Norman.
That would be great,

Alan

[shaun s3c]

Hi does this help

[Alan Whitaker]

Hi
I don't think my motors are the same as them,

Alan

[Gerald-TVR]

Alan remind me is the mechanism ridged or flexible as I have sold both types

[Alan Whitaker]

Hi Norman
I think they are flexible, I can go down and take a picture if it helps.

Alan

[S2Mike]

Hi Alan, I will get a photo of mine tonight, as my door cards have never been on in my ownership, 1990 S2 , so access all areas is available... Ooooh Err Missus!!

[S2Mike]

This

Or this

Or this one with the window halfway lowered.
All these are drivers door.
If any other angle would help let me know.
Good Luck Alan.

[Gerald-TVR]

S2Mike said:

Hi Alan, I will get a photo of mine tonight, as my door cards have never been on in my ownership, 1990 S2 , so access all areas is available... Ooooh Err Missus!!

Those are the third type!! Good old TVR



Flexible type



Ridged type like Shaun's

[Alan Whitaker]

Hi All
This is what I have









I may have to make some mounts in the doors.

Alan

[Gerald-TVR]

Right, the doors I still have were fitted with the non flexible type as shown in my middle photo above so photos wont help I don't think, sorry

Norman

[Alan Whitaker]

Hi All
Thanks for all the pictures, and kind reply's, I think it must go something like the second picture I posted, I guess if I fit the glass runners into the doors, bolt the glass to the motors I should be able to mark up the bottom mounting holes, then run the motor up to the top I should be able to mark or make a mounting for it. I think the motor is in the right place as it looks to fit there. On my way back to the workshop now to try sort out the door gaps, have the same problem as Phillpot with the doors sticking out at the bottom.

Alan