Noble Wiring

[Adzipalmer]

I have just had my dashboard flocked and had a full respray. Problem I have is when it came back from the body shop a couple of the labels have come off in transit etc. the ignition wires on the steering column and wire for Fuel and Temp gauge have come off so need to find out where they go. Can anyone help??? I have taken photos through the process which I will post a detailed topic with pictures and who did what work to help anyone else out who is thinking about doing what I have done.

Regards

Adam

[daddysumo]

There is a full schematic in the US owners manual which is good enough to help you.
If you do not have the manual it is available to download on the Noble Parts forum via Phil Brett who
is also on this forum.

[Adzipalmer]

Thanks so much for that. I will get on there and register.

Adam

[mgbond]

Pictures please of flocking

[Adzipalmer]

I will put all the photo collection from start to finish once the wires have been sorted out. They guy who has done it lives in Hove and was brilliant and cheap.

[JBliss]

PM me if you want a Pdf of the us owners manual.
Jetstream would be the next port of call after the manual

[Adzipalmer]

Thanks for your help

[Adzipalmer]

The car is nearly finished! taking me ages as I have done loads to it. I will be posting photo's next weekend when I get the car back. I have spent thousands (nearly 10k) now and my pride and joy may have to come to end now she is finished due to a change in circumstances. I hope not as it has had 3/4 months of my time and nearly in tears typing this!