are these the right brake pads?
are these the right brake pads?
Author
Discussion

princeperch

Original Poster:

8,268 posts

276 months

Wednesday 19th September 2012
quotequote all
on my old tourer I have 55mm pads on a V brake arrangement back and front.

I'm currently doing 30 miles a day on the commute (only for the next couple of months) but they'll need replacing soon.

the pic below is the pad set up. they sort of go into the holder and then are secured in place to the side - you can see what I mean.



are either of these ones the right pads?

http://www.chainreactioncycles.com/Models.aspx?Mod...

http://www.chainreactioncycles.com/Models.aspx?Mod...


they dont look like standard V blocks to me which normally have a screw cap arangement to secure them?

any advice would be welcome!


Oz83

720 posts

168 months

Wednesday 19th September 2012
quotequote all
No those are for the old style cantilever brakes. You are correct - you will need ones which are threaded and they usually come supplied with the convex/concave washers for adjusting the alignment.

http://www.chainreactioncycles.com/SearchResults.a...

edit - the length of the pad isn't really too important on a tourer, in fact a longer pad will give better braking as there is effectively more pad touching the rim when you brake.

Edited by Oz83 on Wednesday 19th September 19:56

princeperch

Original Poster:

8,268 posts

276 months

Wednesday 19th September 2012
quotequote all
ta - sorry if im being dim but I will therefore need the ones which have the nut at the end then yes?

the link in your post seemed to go to a selection of pads, all different..

HardWorkers

537 posts

239 months

Thursday 20th September 2012
quotequote all
princeperch, you have linked to the correct kind of pad in your opening post.

The more modern threaded ones won't fit your bike.

princeperch

Original Poster:

8,268 posts

276 months

Thursday 20th September 2012
quotequote all
thats great - many thanks. The bike is a bit of an old girl - Raleigh Pioneer 1995 vintage I think!

Oz83

720 posts

168 months

Thursday 20th September 2012
quotequote all
Hardworkers is right - Sorry for the bad info, your image wasn't there when I posted. I wen't off your description but your brakes aren't 'v'brakes' confused

Anyway, hope you get it sorted.

HardWorkers

537 posts

239 months

Thursday 20th September 2012
quotequote all
No problem, happy to help.

princeperch said:
thats great - many thanks. The bike is a bit of an old girl - Raleigh Pioneer 1995 vintage I think!
Pah! My main bike is 25 years old. Admittedly it's got a few newer bits on it now: