Pccb's
Author
Discussion

woppum

Original Poster:

1,137 posts

216 months

Tuesday 11th September 2012
quotequote all
When do I know when the pccb's have had it? My front right one feels quite gritty now? But that may be because it needs a heavy blast on track to scrub them down.the pads look like ere is loads left in them, about1cm from where they touch the pad to the base. Any pointers?

mm450exc

571 posts

208 months

Tuesday 11th September 2012
quotequote all
The pads have 12mm when new. The disc you need to weigh. Each disc has the original weight on it - not sure at what point you need to change.

Got the details at home - will check.

Far Cough

2,482 posts

198 months

Tuesday 11th September 2012
quotequote all
From my basic understanding ........ The recommended rule of pad changing is when friction material is at 50%. So starting with 12mm you are ok until 6mm. Be aware that the inner pads wear quicker than the outer pads and swapping them round is also recommended to even out wear.

The discs have wear markers on them but again the rule of thumb is to look closely at them and if they are all pitted and grooved , they have had it. Porsche allow a certain number of chips but a healthy disc is a nice shiny flat one. Whilst still shiny and looking good they may become "thin" and the only way to check is to weigh them as mentioned above but I have read this wont happen for many many many miles.

mondie

644 posts

172 months

Tuesday 11th September 2012
quotequote all
Interesting topic to me as I have no experience with Carbon brakes. A well looked after non tracked car should be good for 100k miles I thought I read somewhere but not sure about the pads.

Are PCCB's ok in a cold snowy winter, do they retain their feel?

Cheers
Simon

hog 1

400 posts

253 months

Tuesday 11th September 2012
quotequote all
mondie said:
Interesting topic to me as I have no experience with Carbon brakes. A well looked after non tracked car should be good for 100k miles I thought I read somewhere but not sure about the pads.

Are PCCB's ok in a cold snowy winter, do they retain their feel?

Cheers
Simon
Brilliant in the winter. Padgid pads are a good choice to change to when the originals are getting low but fit them all round.

Far Cough

2,482 posts

198 months

Wednesday 12th September 2012
quotequote all

mondie

644 posts

172 months

Wednesday 12th September 2012
quotequote all
Thanks guys, it all sounds good for PCCB's for a road car. I am keen to experience them and willing to carry the cost risk

911Thrasher

2,573 posts

229 months

Wednesday 12th September 2012
quotequote all
mondie said:
Are PCCB's ok in a cold snowy winter, do they retain their feel?
Never had any problems driving the 997.1 GT3RS in the snow (or winter) - yup did quite a few in the snow in London but really going to Courchevel snowboarding a few times. Carbons were great, didnt find any noticeable difference from summer driving.

I had Pagid R29 on.

I did 30kmiles (loads of city driving, mine was our London daily, lots of highway and 8 trackdays) on mine without any failure or signs of fading. Super happy with them.

Edited by 911Thrasher on Wednesday 12th September 11:17

Slippydiff

16,432 posts

253 months

Wednesday 12th September 2012
quotequote all
hog 1 said:
Brilliant in the winter. Padgid pads are a good choice to change to when the originals are getting low but fit them all round.
The original pads are Pagids 40-3 compound IIRC. They're only available from Porsche.