My ceramic brakes parts bin
Discussion
I have my original set of fronts that came on the car, looked a bit poor but did the evo magazine shoot without issue. Certified Ok by porsche Reading.
I also have a set of RSR front and rear which are basically new other than a couple of insignificant chips on the edges. The fronts are too large for the 996 road cars but it looks like the rears are identical but for some different look finish on the bells.
Those are probably PCCB2.
So is there a market for these things? What cars do they fit?
Cheers
SM
I also have a set of RSR front and rear which are basically new other than a couple of insignificant chips on the edges. The fronts are too large for the 996 road cars but it looks like the rears are identical but for some different look finish on the bells.
Those are probably PCCB2.
So is there a market for these things? What cars do they fit?
Cheers
SM
are these 996/997 parts?
if so only the supercups used pccb. 996 used them for one year with 350mm front and rear sizing, 997 used them across several years with 380mm front, 350mm rear discs (same size as the regular cup steels).
the RSR uses metal discs with unique to them brembo calipers. regs dont allow the use of ceramics for the RSR.
post some photos and it might help work out what you have, which will then help work out what they fit and if they are of any use to anyone.
if so only the supercups used pccb. 996 used them for one year with 350mm front and rear sizing, 997 used them across several years with 380mm front, 350mm rear discs (same size as the regular cup steels).
the RSR uses metal discs with unique to them brembo calipers. regs dont allow the use of ceramics for the RSR.
post some photos and it might help work out what you have, which will then help work out what they fit and if they are of any use to anyone.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff