Carnewal exhaust fitted today !
Carnewal exhaust fitted today !
Author
Discussion

Slackster

Original Poster:

44 posts

174 months

Friday 8th June 2012
quotequote all
Evening all,

Had the Carnewal exhaust fitted today, i opted to have it delivered and try to fit it myself however i bottled the fitting and ended up taking it to My local Porsche Indy PEcarspecialists in Barnsley.

Took about 2.5hrs in the end as the guy had to blowtorch the rusted bolts out of my original exhaust so i'm pleased i didn't attempt it myself.

So far i've done about 30miles in the rain and its a great sound, low revs rumble is lovely, has a bit of a pop when letting off the gas and it howls great on a bit of throttle, no drone so far as I can tell.

Can't recommend it more for the cayman! Was tempted by the PSE until i was quoted £2500 but i'm far happier I opted for this as its brilliant for the money.

Only downside is that while it was up on the ramps i noticed some oil underneath and the mechanic diagnosed a probable rms leak frown .. His advice was that since its not burning through oil or dripping yet that I have some time to get it done, is this sound advice?

Cheers

Russ



Edited by Slackster on Friday 8th June 19:47

tjlees

1,382 posts

267 months

Friday 8th June 2012
quotequote all

Glad the exhaust worked out. How much did you save over the opc pse one?

For the rms leak, if it's only slightly weeping, you can wait until the clutch needs changing and do it at the same time - just need to watch it in the meantime.

A quick search of the forum is probably in order to see what other have done in the same situation.

I suppose it has no warranty?

dadofbud

589 posts

239 months

Friday 8th June 2012
quotequote all
How long did it take from ordering it to receiving it ?

Why does someone in the UK not offer this modification ?

jontymo

853 posts

180 months

Friday 8th June 2012
quotequote all
Sounds great, your not far from me if you fancy a meet up so i can see/hear it, what was the cost if you don't mind me asking.

jontymo

Slackster

Original Poster:

44 posts

174 months

Friday 8th June 2012
quotequote all
Evening guys

The Carnewal GT exhaust cost around £700 and took about a week to be made and shipped, once I send my original ones back I will get a refund of around £300 so that they can be used for the next customer.

So I saved around £2k on the PSE option if i add on the £80 fitting charge for the 2.5hrs the chap spent getting the old rusty bolts out.

Thanks for the heads up on the RMS leak, will keep an eye on it until I see a spot on the block paving.

Slackster

Original Poster:

44 posts

174 months

Friday 8th June 2012
quotequote all
Hey Jontymo,

I'm in north Sheffield, is that close enough?

jontymo

853 posts

180 months

Friday 8th June 2012
quotequote all
I'm in huddersfield, if you look through the porsche forum a couple of us are aiming to meet up on sunday morning at the cat and fiddle pub if you fancy it.

jontymo

Slackster

Original Poster:

44 posts

174 months

Friday 8th June 2012
quotequote all
Not far away at all!

I'm deffo interested but with a 3 week old at home the "boss" may have other ideas smile

What time is everyone meeting?



Russ

jontymo

853 posts

180 months

Friday 8th June 2012
quotequote all
Aiming at 10, have a look on page 3 for the post

Martian O

2,734 posts

192 months

Saturday 9th June 2012
quotequote all
Slackster said:
...£80 fitting charge for the 2.5hrs the chap spent getting the old rusty bolts out.
£32/hour, that's a cheap labour rate!

sconzo

123 posts

198 months

Monday 11th June 2012
quotequote all
Definately the best £500 I've spent. And it only gets better once it's had a chance to properly carbonise.

Ian_UK1

1,515 posts

224 months

Monday 11th June 2012
quotequote all
Another big thumbs-up for Gert Carnewal's exhausts, but this time for the 997S.2

I have a pair of the Carnewal, internally-modified, 'RSR' exhaust cans (together with centre silencer bypass pipes, bought separately) fitted to my car. Saving over the PSE was about £1400 and the car can also be reverted to standard in about 2 hours (including removing/refitting the rear bumper and heat shields) if it needs to go to the dealers. The mods made to the cans are genuinely invisible - they're welded back-up along the factory seams and the weld quality is every bit as good as the factory. Nice.

The sound is louder/deeper than the (ridiculously quiet) standard 997S.2 system, whilst still sounding like a 'proper Porsche' - i.e. it has that characteristic Porsche sound that's often missing with aftermarket exhausts. The overall volume is about the same as the PSE and there is no drone whatsoever in the cabin. In fact, the slight resonance you get with PDK cars at motorway speeds is now gone, so it's even less intrusive than the standard exhaust at part throttle.

Even better, taking away the two tight, 180-degree bends (they're inside the standard, centre silencer) and replacing them with almost straight pipes adds about 10BHP to the equation and removes about 10lbs of weight from the rearmost part of the car.

All-round, an excellent buy and thoroughly recommended.

juansolo

3,012 posts

308 months

Monday 11th June 2012
quotequote all
If you're up north, it's just as easy to hop on the Hull-Zeebrugge ferry and let Gert do the job himself. It's how I did it and as has been mentioned, it's bloody brilliant.