Replacement Water Pump
Replacement Water Pump
Author
Discussion

shoab

Original Poster:

129 posts

193 months

Wednesday 9th May 2012
quotequote all
Hi all,

I need to replace the water pump on my S2 2.9 V6. Am I right in thinking that this is the same as the Granada Scorpio pump...sorry to be a pain but the search is down and I was hoping someone will know straight off....I have seen a couple on fleabay and was going to order one !

Item number: 260891487061


Thanks in anticipation

Regards

Graham

Stew Mc

401 posts

202 months

Wednesday 9th May 2012
quotequote all
Hi.
My 2.9 S3 has had a couple of pumps by the previous owner. Numbers are as follows and may help to cross ref?

Replaced –First Line FWP1404
Motaquip VWP426

Cheers, Stew.

shoab

Original Poster:

129 posts

193 months

Wednesday 9th May 2012
quotequote all
Hi Stew

Thanks for the quick response will give it a go !

Regards

Graham

phillpot

17,509 posts

212 months

Wednesday 9th May 2012
quotequote all


Another number to try...

Euro car parts 201560305

tvrgit

8,489 posts

281 months

Wednesday 9th May 2012
quotequote all
That ebay item in the OP is the correct part - it will fit.

You take your chances on "pattern part" quality and durability (having said that, I bought my replacement pump on ebay a few years ago and it's still going strong)

shoab

Original Poster:

129 posts

193 months

Thursday 10th May 2012
quotequote all
Hi all,

Thanks for the replies....much appreciated....I will get one ordered ! My pump is not leaking but my god is it noisy, I know its not the alternator and when I took off the drive belt the noise disappeared.

Regards

Graham

FARKIT

150 posts

244 months

Monday 14th May 2012
quotequote all
Fitted the Europarts water pump on Friday (it comes with gasket). No problems fitting, apart from a sheared off bolt whilst removing the old one.

Under £70 and so far, a very good part.....

The part number is 201560305 - £68.40

Edited by FARKIT on Sunday 20th May 11:46

shoab

Original Poster:

129 posts

193 months

Tuesday 15th May 2012
quotequote all
Fitted a Firtsline FW1404 yesterday no problems at all it certainly sounds better than the one that came off. My god what a noise that one made, no play in the bearing and no leaks but when you spin it by hand now itsoff it is sooooo rough !

Just need to sort out main beam on the headlights and rear fogs now (any ideas) and then should be nearly BOR after a year...cant wait !

Graham

tvrgit

8,489 posts

281 months

Tuesday 15th May 2012
quotequote all
shoab said:
Just need to sort out main beam on the headlights and rear fogs now (any ideas) and then should be nearly BOR after a year...cant wait !
Any clues to what the headlight problem is? It could be the fuse, the switch, the connector(s) beside the bonnet hinges, or at the lights themselves. If both are not working, I'd be checking the fuse and switch first. You need to get in there with a meter or test lamp and find out if power is reaching the switch, and then if the switch is actually making the circuit when you move it.

Rear Fogs - similarly, you need to find out how far along the circuit power is getting. I had this very problem only last week, if you look at my website at http://www.tvrgit.com and the diary entry for Friday (11 May) you'll see that in my case, after dismantling half the interior to get to the switch to test it, it was corrosion inside the switch - dismantle switch, clean that up and all sorted!

Scoobimax

1,892 posts

230 months

Wednesday 2nd January 2013
quotequote all
Hi all - resurrecting this as I'm going to buy a replacement water pump as I'm still not 100% with my cooling system and I'd rather swap bits in a controlled way rather than in a French motel car park like a certain Stevej eeklaugh

so, is there any great difference in quality to the units listed in this thread?

Europarts
Motaquip
firstline

or should i try for a genuine Ford Motorcraft?

Cheers.

Max

phillpot

17,509 posts

212 months

Wednesday 2nd January 2013
quotequote all

Probably all come out the same factory (in China) getmecoat

Sandgrounder

564 posts

173 months

Wednesday 2nd January 2013
quotequote all
Thanks for resurrecting this Scoobimax, I went for a New Years Day drive yesterday, and was reminded instantly that my water pump is screeching like a banchee! Plus I can pull the pulley forward and backwards (noted check from a previous thread).

I have tried to ignore the noise, but when it starts impacting on my enjoyment of Exhaust Note, it is time to act.

I eagerly await feedback regarding which is the 'better' spare to fit.

Graham

S2Mike

3,065 posts

179 months

Wednesday 2nd January 2013
quotequote all
Just a point to beware, the 2.9 has an alloy housing behind the water pump that covers the timing chain and has one of the water outlets as a part of it, this part is discontinued by Ford, although listed in the catalogue at around £70 I could not get one. Ended up buying a secondhand engine complete, to obtain one. The water pump itself was no problem at all but the housing outlet was cracked, but changed it at the same time.

shoab

Original Poster:

129 posts

193 months

Thursday 3rd January 2013
quotequote all
For some reason my reply to this ended up on the tax v sorn thread as I'm on my phone its difficult to change...sorry

Regards

Graham

Sandgrounder

564 posts

173 months

Thursday 3rd January 2013
quotequote all
Seen it. Thanks Graham

Scoobimax

1,892 posts

230 months

Thursday 3rd January 2013
quotequote all
what shoab tried to post said:
I had no issues with Firstline....but have not really done enough mileage to judge reliability...probably they do all come from the same source as tooling up for production for a limited supply would be expensive.....even if its only the casting which is made in one place and bearings etc are fitted by individual suppliers..

The only issue to be careful of is bolt removal some are tight and corroded and because they are corroded they have their cross sectional area thinned ...so caution is needed.


Good Luck

Graham