Rolling Road Day @ Wallace Performance 23rd June
Discussion
Hi Folks
We at scottishscoobies.net have organized a Rolling Road Day @ Wallace Performance in Aberdeen for the 23rd of June 2012 9am start and would like to invite you guy's to join us and to take part as well all kinda of car are welcome
Each car will have 2 power run's with Graph's for you to take home
Cost of the run's depend on what number of car turn up for the day
1-5 cars £60 per car
5-10 cars £50
10-20 cars £40
20-30 cars £30
ss.net members list
1-matt-scoobie347
2-Sandy
3-Smallcataunya (maybe)
4-Burnett ( if at home)
5-oggy (depending if im working)
6-Gingergnosis
7-bigbaz(if at home)
8-Riggers STI
9-dan164
10-geordie-scooby
11-E5 TRK ( Possible)
12-scottishtaffy
13-Bruce (evo 5 if not sold or taxed)
14-
Pistonheads members
1-
2-
3-
4-
5-
6-
We at scottishscoobies.net have organized a Rolling Road Day @ Wallace Performance in Aberdeen for the 23rd of June 2012 9am start and would like to invite you guy's to join us and to take part as well all kinda of car are welcome
Each car will have 2 power run's with Graph's for you to take home
Cost of the run's depend on what number of car turn up for the day
1-5 cars £60 per car
5-10 cars £50
10-20 cars £40
20-30 cars £30
ss.net members list
1-matt-scoobie347
2-Sandy
3-Smallcataunya (maybe)
4-Burnett ( if at home)
5-oggy (depending if im working)
6-Gingergnosis
7-bigbaz(if at home)
8-Riggers STI
9-dan164
10-geordie-scooby
11-E5 TRK ( Possible)
12-scottishtaffy
13-Bruce (evo 5 if not sold or taxed)
14-
Pistonheads members
1-
2-
3-
4-
5-
6-
Edited by matty290782 on Tuesday 8th May 17:25
I was on there at another RR day back in Feb but I'll have made a couple more tweaks and sorted a couple of issues out by then so keen to go on again:
Pistonheads members
1: MGZRod - MK2 MX5
2: mazdajason - corolla t sport
3: 8bit - Seat Leon Cupra R
Pistonheads members
1: MGZRod - MK2 MX5
2: mazdajason - corolla t sport
3: 8bit - Seat Leon Cupra R
Edited by 8bit on Wednesday 9th May 11:36
Well, their dyno shouldn't be a problem for low cars, but it is worth noting that their insurance doesn't let you in the room with the car on the dyno - so no vids of the Zed unfortunately.
Gained about 9hp at the top end with the remap and new ECU, so puts me a hair under 290 (289.6 I think) at the flywheel and 258ish at the rear wheels - happy enough - main goal of the operation was to sort the fuelling out - which was super lean - so overall happy - just need some dry quiet roads to test it now
Seems like a decent set up, and if the metal on show in the car park (lots of tasty Evos) is anything to go by, the guys are proper petrolheads too.
Gained about 9hp at the top end with the remap and new ECU, so puts me a hair under 290 (289.6 I think) at the flywheel and 258ish at the rear wheels - happy enough - main goal of the operation was to sort the fuelling out - which was super lean - so overall happy - just need some dry quiet roads to test it now

Seems like a decent set up, and if the metal on show in the car park (lots of tasty Evos) is anything to go by, the guys are proper petrolheads too.
Parsnip said:
Would be keen for this, but going for a dyno session and ECU remap there tomorrow.
Will let you know how their set up is - the Zed isn't that low, but can still catch its chin on things - how low is your MX5?
I was under the impression you had to use UPrev software to remap the car.(or do u have a piggy back ECU?)Will let you know how their set up is - the Zed isn't that low, but can still catch its chin on things - how low is your MX5?
What other mods do you have? 289 is a good result

kmm said:
I would like to go to this, but it's my wee girls 1st Birthday. I could only stay max 2 hrs, so would need to push to the front of the que. If this is possible without upsetting people who had their names down long before me then let me know.
kmm - RS4
am sure we could sort some thing out for you more than likely all 4x4 will go first but i will confirm with Wallace and let you know kmm - RS4
EvilZ said:
Parsnip said:
Would be keen for this, but going for a dyno session and ECU remap there tomorrow.
Will let you know how their set up is - the Zed isn't that low, but can still catch its chin on things - how low is your MX5?
I was under the impression you had to use UPrev software to remap the car.(or do u have a piggy back ECU?)Will let you know how their set up is - the Zed isn't that low, but can still catch its chin on things - how low is your MX5?
What other mods do you have? 289 is a good result


Got a pop charger (maybe getting replaced with the nismo kit), plenum spacer, berk hfcs and a nismo exhaust on there. Yep,do have a piggyback ecu (dastek unichip) . She is all but finished, not much else to do but go FI and I don't really want to do that
toying with the idea of a nismo bodykit and to do something with the wheels, but no more powerrrr 
Gassing Station | Scotland | Top of Page | What's New | My Stuff



