clutch slave cylnder for S3C

[nigegas]

hi all im in need of a new clutch slave cylnder as mine has sprung a leak and i have no clutch does anyone have a part no and where from cheers nige.

[davedogfish]

Nigel,

The original Girling part number is 74660035. The Girling part was original fit on the Rover SD1 and Triumph TR7 and is 3/4 inch bore. After being sent the wrong part (1inch bore) by one TVR specialist, I contacted a very helpful and knowlegeable company called PowerTrack (01753842680) whe sent me the correct part. It wasn't particularly cheap (£50ish with VAT) but the important thing for me was that it had the correct thread for the existing male hydraulic hose connector. PowerTrack do have a website but don't have an online catagogue so you'll need to call them. Oh, and start practising your keyhole surgery skills - you'll need them.

Dave

[orange_dodo]

If you want the cheap option then there is a landrover part that fits. I put all the info from my replacement in this thread.

[nigegas]

HI all i now have a new clutch slave cylnder and im trying to find the correct size pipe fitting to the master cylnder is it 3/8 unf x 20 tpi to a 3/16 pipe
? nige.