fuel tank repair

[V8s ONLY]

I need a fuel tank repairing.It is from a Bristol 411 s1,and has a hat shaped sump on the bottom with a drain plug soldered in it.The sump is about eight inches diameter and three inches deep and is a separate piece that is screwed and soldered to the main tank.After cleaning the tank this sump now has several holes in it. I am looking for someone who could make a new sump and solder or weld it to the main tank.Any ideas anyone?

[felixlighter]

Your request is a bit complex for most folk, you need a specialist, try posting your requirements on here http://www.mig-welding.co.uk/forum/index.php where you will find some real metal wizards.
Good luck

[stainless_steve]

Take it to your nearest sheet metal/fabrication shop,easy job for them.