Toe adjuster Seized

[Zanshin]

Hi guys (and Gals!!)

I hope you can help me here. Just had a nice set of Gaz Gold Pros fitted to my Chim but we have a problem with setting the geometry up properly as the OSR adjuster has seized solid Any bright ideas that can help me free it up without breaking the car or the bank!!

[Alexdaredevilz]

Heat and a very long spanner

[robsco]

Lots and lots of heat.

[Zanshin]

When you guys say lot and lots of heat....are we talking "red hot" or???

[Alexdaredevilz]

Just enough so the nut glows a tiny bit

[Zanshin]

Alexdaredevilz said:

Just enough so the nut glows a tiny bit

Hiya Matey

Fk me! I have thoughts runnin through my head of me with a blow torch and dripping hot metal! Not a good idea

Oh an Thanks again for the advice on the 500 monster at mr Badger's place...he took 300 from my deposit for the privilege of not being ripped off by him

Will you be at chatsworth???

[Alexdaredevilz]

Zanshin said:

Alexdaredevilz said:

Just enough so the nut glows a tiny bit

Hiya Matey

Fk me! I have thoughts runnin through my head of me with a blow torch and dripping hot metal! Not a good idea

Oh an Thanks again for the advice on the 500 monster at mr Badger's place...he took 300 from my deposit for the privilege of not being ripped off by him

Will you be at chatsworth???

Step away from the car!

Mr badger will be noted as a tosser thanks for the heads up, but even if you lost 300 on that car, you wouldn't ended up spending ALOT more sorting it

Wont be doing Chatsworth because of old work messed me about

[Robertjp]

i had to remove the wishbone and take it to a local wire edm company to get the old one out. Then tidied up the thread. No amount of heat or brute force would shift it!