Roll over rear hoop S1
Roll over rear hoop S1
Author
Discussion

rolandmgb

Original Poster:

28 posts

195 months

Saturday 25th February 2012
quotequote all
Hi

As a new to TVR's please could anyone tell me where i can get a roll over bar from. I just want a rear hoop to give some extra protection when on the road. I don't want a full cage of harness type seat belts. Thanks for reading

magpies

5,203 posts

211 months

Saturday 25th February 2012
quotequote all
what area are you in

rolandmgb

Original Poster:

28 posts

195 months

Saturday 25th February 2012
quotequote all
Midlands area but don't mind traveling within reason. Idealy a hoop i can fit myself would be best

GreenV8S

31,017 posts

313 months

Monday 27th February 2012
quotequote all
Rollcenter made the ones that Tower View sold. Tower View had an exclusive arrangement but since they aren't trading any more you may find that Rollcenter will deal with you directly.

rolandmgb

Original Poster:

28 posts

195 months

Monday 27th February 2012
quotequote all
Thanks for the link. Trouble is the web sites got no prices. I can't understand in this internet age why these companies don't put prices on line. I think this is a site i've already sent a request to.

magpies

5,203 posts

211 months

Monday 27th February 2012
quotequote all
Try Geronimo in Hartlepool

They did mine...but that is a full cage

They did say as TVRs are never all the same dimensions they need the car to measure

Longers

4,505 posts

257 months

Monday 27th February 2012
quotequote all
Guglielmi Motorsport in Daventry - great service and in your "midlands" area as well. Further details in this previous topic...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

phillpot

17,510 posts

212 months

Monday 27th February 2012
quotequote all

Lot of "discussion" for and against on other TVR forums.

very rare for a car to roll in a road traffic accident (although I did manage it with a '66 Mustang many years ago) but very good chance of whacking your head on a roll bar in a front, rear or side impact (yes, they can be padded) ?


but they do look cool cool


Alan Whitaker

2,054 posts

211 months

Monday 27th February 2012
quotequote all
Hi All

I think if you have harness type seatbelts a roll bar or hoops are essential as if you roll the seatbelts don't allow you room to duck down like you can do with lap type, we have all leaned over to pick up something you can't do that with harness type belts, I agree with you phillpot about rolling over in a traffic accident but if you go off the road into a ditch there is a chance of rolling.

Alan

mikel003003

1,084 posts

195 months

Monday 27th February 2012
quotequote all
Ha. Phillpot rolled a mustang. Awsome

Longers

4,505 posts

257 months

Tuesday 28th February 2012
quotequote all
phillpot said:
very rare for a car to roll in a road traffic accident (although I did manage it with a '66 Mustang many years ago) but very good chance of whacking your head on a roll bar in a front, rear or side impact (yes, they can be padded) ?
I decided to get one (& Mrs L'rs insisted) after I nearly died while driving a mates Caterham. Well, I wasn't actually driving it at the time... I was stationary when the 10 ton lorry doing 40mph drove into the back of me. I was parked on the side of the road while my mate went for for a desperately needed pee in a convenient clump of bushes.

Every time after that I got into my TVR I looked at the steering wheel without an airbag. If I'd not been wearing a harness in the Caterham I'm certain it's steering wheel would've been buried in my head. And although I had a bit of whiplash it was relatively minor because the harness held me in position. The biggest problem was having the remains of the lorrys headlight picked out of the back of my head...

So, although they are inconvenient at times I feel much more secure and (mentally) comfortable with the harnesses. And you don't fit harnesses without a roll bar.

Also the roll bar also makes the car an enormous amount stiffer which helps the handling, as well as giving me somewhere to mount my camera wink

rolandmgb

Original Poster:

28 posts

195 months

Friday 2nd March 2012
quotequote all
Thanks to all who replied to this topic

Alan Whitaker

2,054 posts

211 months

Saturday 3rd March 2012
quotequote all
Hi All.
I just found this picture on my PC, I kept it as this is what I was thinking of when I get mine made. I don't know who made this so if anybody knows can you post back who made it.





Alan