Passenger footwell ecu
Passenger footwell ecu
Author
Discussion

rikster666

Original Poster:

37 posts

211 months

Wednesday 31st August 2011
quotequote all
Hi,

I have a Griff and in the passenger footwell my ECU is just floating about. I assume it was originally fixed some how? and hints or tips would be greatly received.

Regards

Rik


bigdods

7,175 posts

256 months

Wednesday 31st August 2011
quotequote all
In the chim its just shoved down the side of the battery, I assume some similar arrangement was standard on the griff

tonywilliams

214 posts

231 months

Wednesday 31st August 2011
quotequote all
In the Cerbera its in the footwell and uses velcro to attach it to the car, just like all the other little electronics boxes and modules.

Pacman1972

327 posts

291 months

Wednesday 31st August 2011
quotequote all
did this on my old chim - not sure if its pos on a griff though?

http://pistonheads.com/gassing/topic.asp?h=0&f...

Hoover.

5,993 posts

271 months

Wednesday 31st August 2011
quotequote all
the ecu box is not fixed in the griff..... it wedges between the battery box and the transmission tunnel

bomb

3,795 posts

313 months

Thursday 1st September 2011
quotequote all
I use the empty half bootle of Vodka from the wifes handbag, to jam it into place. Works a treat.

drink

mikial

1,913 posts

291 months

Friday 2nd September 2011
quotequote all
Hoover. said:
the ecu box is not fixed in the griff..... it wedges between the battery box and the transmission tunnel
On a 500 there is no room between battery box and transmission so it`s just placed on top of the battery or in front , cutting down on leg room in the passenger footwell.

I have placed mine on top of the battery but isolated with a rectangular platform of M.D.F.

Derek Smith

49,726 posts

277 months

Friday 2nd September 2011
quotequote all
Picture on one in place in 93 Chim here: http://www.rv8r.co.uk/ecu.html

rikster666

Original Poster:

37 posts

211 months

Sunday 4th September 2011
quotequote all
Thanks to everyone that replied

E Ponym

1,233 posts

296 months

Sunday 4th September 2011
quotequote all
The Wedge cars have the ECU attached to a bit of board above the passenger footwell. One end of this board is attached to the car by a shed-hinge (appropriate!), the other end just "pushes in" behind the dash.

Lots of passengers get worried when the ECU falls onto their shins under heavy braking, many owners have developed Heath-Robinson tricks to keep the ECU in place, pity the factory couldn't.

Russ

Toffer

1,528 posts

290 months

Tuesday 6th September 2011
quotequote all
Griffith ECU was originally laid on top of the battery box, on a piece of carpet and under-felt...seemed to hold everything in place nicely along with some miscellaneous wiring and relays.

FlipFlopGriff

7,144 posts

276 months

Wednesday 7th September 2011
quotequote all
Mines on a piece of wooden board on top of the battery, as they can be affected if it touches the battery terminals. Another crap TVR design. Also right under the water pipes!!
FFG

NailedOn

3,118 posts

264 months

Wednesday 7th September 2011
quotequote all
T350c. Duck tape!

Toffer

1,528 posts

290 months

Wednesday 7th September 2011
quotequote all
NailedOn said:
T350c. Duck tape!
FTW! smile