Alfa 156 front suspension......DIY job?
Discussion
Hi all. I'm looking for some advice...
Last night when washing the car I noticed a slight knocking if I put weight on the front nearside corner of my 156 sportwagon. I took the wheel off, suspecting possible loose wheel bolts, but they were fine, and in the end narrowed it down to a small amount of play in the UJ on the top suspension wisbone.
My question is, do any "experts" on here think this is a job which could be done on the driveway, and what should I look out for, or am I off to the garage with a wad of notes?
Thanks in advance
Kev
Last night when washing the car I noticed a slight knocking if I put weight on the front nearside corner of my 156 sportwagon. I took the wheel off, suspecting possible loose wheel bolts, but they were fine, and in the end narrowed it down to a small amount of play in the UJ on the top suspension wisbone.
My question is, do any "experts" on here think this is a job which could be done on the driveway, and what should I look out for, or am I off to the garage with a wad of notes?
Thanks in advance
Kev
Depends what you're comfortable with DIYing.
Guide here: http://www.alfaworkshop.co.uk/alfa_wishbone_replac...
Guide here: http://www.alfaworkshop.co.uk/alfa_wishbone_replac...
Gassing Station | Alfa Romeo, Fiat & Lancia | Top of Page | What's New | My Stuff


