X Box

Author
Discussion

alan_driver

Original Poster:

1,281 posts

264 months

Monday 11th August 2003
quotequote all
Has anyone ever tried to replace a X Box hard drive with a bigger one? I intend to do this and wanted some advice. The physical swapping over is not a problem, its the software on the HDD that needs to be transfered to the new HDD. Would I need to put the drive into a PC, copy to another HDD, then change the one copied from, to the new one, and paste the files back over. OR, can I use a crossover cable and network card to grab the files and swap them.
Also does anyone know if the main board is double sided (I need to solder to it)

squirrelz

1,186 posts

278 months

Monday 11th August 2003
quotequote all
I think the xbox needs to have a mod chip fitted to enable a HD swap.

^Slider^

2,874 posts

256 months

Monday 11th August 2003
quotequote all
And last i herd, the pin configurations are different from the standard ide for the xbox, you could probably find the info about it on the web somewhere, failing that i can prolly get the email of the guy that done my mates hard drive for his xbox.
Gareth

JamieBeeston

9,294 posts

272 months

Monday 11th August 2003
quotequote all
Stick in new hdd, boot of a 'boot loader dashboard' cd.

Select Rebuild hdd, bobs uncle

done

(nb i dont know if you need a mod chip to do this, but irrc there are now softmods available anyway)

alan_driver

Original Poster:

1,281 posts

264 months

Monday 11th August 2003
quotequote all
It will require a mod chip, or so I have been told, thats why I need to know if the circuit board is double sided or do I need to solder actually on the top layer (VERY little area)

docevi1

10,430 posts

255 months

Tuesday 12th August 2003
quotequote all
My mate's brothers friend's cousin's son, well ok, my mates brother did this, the mod chip he bought didn't need soldering - it was little clip on wires or something, then he got a 120Gb drive in there

When buying the larger drive make sure it's the 5400rpm disks and otherwise heat build up will be an issue.

Stefan

alan_driver

Original Poster:

1,281 posts

264 months

Wednesday 13th August 2003
quotequote all
docevi1 said:
My mate's brothers friend's cousin's son, well ok, my mates brother did this, the mod chip he bought didn't need soldering - it was little clip on wires or something, then he got a 120Gb drive in there

When buying the larger drive make sure it's the 5400rpm disks and otherwise heat build up will be an issue.

Stefan

Shit, your joking?! The one i got is 7200rpm, cos its faster! Oh well, guess I could put a fan in there?!

tvrforever

3,182 posts

272 months

Wednesday 13th August 2003
quotequote all
Have a look at www.xbox-scene.com as that is the 'bible' for XBox mods & tech news...

Also on that topic, check out www.xbconnect.com - allows you to play SystemLink games (ie. Halo) over the internet with loads of other people - and it's free!!

XBox rocks as well - but be very careful if you have your system mod'd as you'll need to hard disable the mod before running XBox live - otherwise you'll be banned..

alan_driver

Original Poster:

1,281 posts

264 months

Thursday 14th August 2003
quotequote all
tvrforever said:
Have a look at www.xbox-scene.com as that is the 'bible' for XBox mods & tech news...

Also on that topic, check out www.xbconnect.com - allows you to play SystemLink games (ie. Halo) over the internet with loads of other people - and it's free!!

XBox rocks as well - but be very careful if you have your system mod'd as you'll need to hard disable the mod before running XBox live - otherwise you'll be banned..


I did it yesterday, fitted a switch too so I can turn it off for Xbox live internet thing.