The 3D Printer Thread
Discussion
Lazadude said:
I've ordered a P1S with AMS to replace my Ender 2 thats been used for years, anyone have any QOL upgrade suggestions for the P1S?
Nope, just set it up and print.I would suggest doing the usual filament config/calibration stuff for anything that isn't PLA but you should be used to that from an ender.
![censored](/inc/images/censored.gif)
Colour me very impressed!
Celtic Dragon said:
![censored](/inc/images/censored.gif)
Colour me very impressed!
If only every print could be like that 100% of the time
I've had my P1S around a couple of weeks and I've done 8 prints so far in PLA and PTEG, all without really knowing what I'm doing other than loading a model and pressing print. 6 of those prints were models I made myself so I'm so relieved those worked because I don't want to be totally reliant on off-the-shelf stuff.
The only problem I've had was with my model, not the printer. I mashed a couple of models together in Blender but check the slice and it printed a hollow space where the two objects intersected. I just reprinted one of them stuck it into the gap, the shored it up with a bit of tape - sorted.![biggrin](/inc/images/biggrin.gif)
I'm still a bit nervous of the inevitable day it ends up like the videos I've seen of borked prints because I'll have no idea what to do, but so far I am relieved how easy it has been.
The only problem I've had was with my model, not the printer. I mashed a couple of models together in Blender but check the slice and it printed a hollow space where the two objects intersected. I just reprinted one of them stuck it into the gap, the shored it up with a bit of tape - sorted.
![biggrin](/inc/images/biggrin.gif)
I'm still a bit nervous of the inevitable day it ends up like the videos I've seen of borked prints because I'll have no idea what to do, but so far I am relieved how easy it has been.
Does anybody fancy a simple commission?
I'm after an adapter that will connect my mini pump to my big agnes inflatable sleeping mat.
Here's a link to a similar adapter: https://www.printables.com/model/274359-flextailge...
The thing is I don't have that precise pump. I have this one, which as you can see comes with a series of 'standard' adaptors: https://www.amazon.co.uk/dp/B0C5HDTWGQ?ref=ppx_yo2...
Knowing nothing about 3d printing (and therefore the file linked above), is it possible to amend the above design to either fit a standard pump adaptor or alternatively my pump please?
Happy to pay/charity donation etc.
I'm after an adapter that will connect my mini pump to my big agnes inflatable sleeping mat.
Here's a link to a similar adapter: https://www.printables.com/model/274359-flextailge...
The thing is I don't have that precise pump. I have this one, which as you can see comes with a series of 'standard' adaptors: https://www.amazon.co.uk/dp/B0C5HDTWGQ?ref=ppx_yo2...
Knowing nothing about 3d printing (and therefore the file linked above), is it possible to amend the above design to either fit a standard pump adaptor or alternatively my pump please?
Happy to pay/charity donation etc.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff