Land Rover Discovery 4 Headlight & Grill Theft
Discussion
Rear lights you need to swap the two existing retaining screws for anti theft number plate screws (torx type) and make sure you use the little plastic caps so the torx pattern is hidden. Rear lights can be removed without the tailgate gate being lifted by some thieves.
Front lights. These are the 'go to' anti theft' brackets produced by a guy with a strong LR pedigree..
https://www.ebay.co.uk/itm/Discovery-3-4-Headlight...
Grill is trickier as it just a few clips. The most common way now is to use self drilling torx pan head screws in black and secure the top of the grill to the metal trim behind. Be careful not to use too long a screw and to find a place which is clear behind (that sounds more scary than it is!).
All the above will considerably slow down thieves and they'll probably give up....
Good luck...
PS The Disco3.co.uk forum is probably one you should join for more help and tips...
Front lights. These are the 'go to' anti theft' brackets produced by a guy with a strong LR pedigree..
https://www.ebay.co.uk/itm/Discovery-3-4-Headlight...
Grill is trickier as it just a few clips. The most common way now is to use self drilling torx pan head screws in black and secure the top of the grill to the metal trim behind. Be careful not to use too long a screw and to find a place which is clear behind (that sounds more scary than it is!).
All the above will considerably slow down thieves and they'll probably give up....
Good luck...
PS The Disco3.co.uk forum is probably one you should join for more help and tips...
Gassing Station | Land Rover | Top of Page | What's New | My Stuff