Indicators Flashing Rapidly
Discussion
Hi all,
My indicators are going wild. I have checked the bulbs front and rear, I don't have a bulb out. I suspect the flasher is on its way out? Hazards work fine, but I think they're on a separate flasher anyway. Could it be water/damp related.
Not too hot with auto-electrics.
Also, what is the bit of plastic that cancels the indicators in the steering column? It has broken apart and I have had to remove the pieces. Could do with a new one from mini spares and most probably a flasher whilst I'm at it!
Thanks
Tom
My indicators are going wild. I have checked the bulbs front and rear, I don't have a bulb out. I suspect the flasher is on its way out? Hazards work fine, but I think they're on a separate flasher anyway. Could it be water/damp related.
Not too hot with auto-electrics.
Also, what is the bit of plastic that cancels the indicators in the steering column? It has broken apart and I have had to remove the pieces. Could do with a new one from mini spares and most probably a flasher whilst I'm at it!
Thanks
Tom
DanGT said:
Check the socket when you replace the unit as they can get rust. A bit of greas on the pins helps stop this.
If you have problem getting the plastic part it may be worth looking second hand.
Yes, the plastic bracket has broken (which I hear is very common) so have cable tied the unit in place. I'll give it the once over, as I appear to have been checking the hazard flasher by mistake - which is new! If you have problem getting the plastic part it may be worth looking second hand.
Gassing Station | Classic Minis | Top of Page | What's New | My Stuff