Charging problem - MPI

Charging problem - MPI

Author
Discussion

casbar

Original Poster:

1,112 posts

222 months

Sunday 17th October 2010
quotequote all
Stumped. The battery doesn't seem to be charging, when the car is running. I have put a multi meter on the Alt, and I get 14 volts. I get 13 volts at the starter. But on the battery, I only get 12 volts with the engine running, and I would expect 14 ish there as well. Battery just runs down in a few days. The charging light comes on with the ignition and goes off when the car is started.

Neil8p

175 posts

254 months

Sunday 17th October 2010
quotequote all
Had a similar problem on ours, solved it by adding an extra earth cable. I fitted it between the gearbox and the front subframe.

Cooperman

4,428 posts

257 months

Monday 18th October 2010
quotequote all
Yes, sounds like an earth issue. It's often the boot floor to battery negative
cable. You can check it by running a jump lead from the engine block to the battery neg terminal and then measure the voltage. That should give you an answer.

casbar

Original Poster:

1,112 posts

222 months

Monday 18th October 2010
quotequote all
Thanks, I'll try that