Is my clutch verto or pre verto!!?

[highway]

Chaps, bought a nice low miles 1996 Mini. It has singlepoint fuel injection but the clutch has died, I suspect the slave cylinder is to blame. Looking on Ebay for a replacement but its not clear whether I need verto or pre verto? What would be fitted to a car of this year? Many thanks for a speedy answer!

[tangent police]

Probably verto.

If the cylinder is at 45deg operating a 4" ih clutch arm, it's a verto.

If it's the long arm with the horizontal cylinder, it's probably a pre-verto.

That's without taking the wok off.

[Mini_Lund]

I'll agree, with the above. It is more than likely that you have a verto setup.

Here is the part you're after http://minispares.com/Product.aspx?ty=pb&pid=3...

Give MiniSpares North a call on 01423881800, they'll sort you out.

[annodomini2]

Factory was verto unless its been converted.

Check the Clevis pins on the clutch lever arm as these tend to wear.

Top

Bottom

[highway]

Thanks chaps. Verto slave ordered (sounds like something out of a sci fi film!) The car has done less than 16k from new with all the old MOTS, enjoying working on it but will enjoy selling even more!