New Skin or Door
Discussion
Hello all
The bottom of my door is falling apart fast and from the picys i wonder what peoples opinions on whether i should get it re-skinned or just source a 2nd hand door and get it re-sprayed
[pic www.fotango.com/p/eba00390909f00000001.jpg /pic]
[pic www.fotango.com/p/eba00390909f00000002.jpg /pic]
>>> Edited by Dodgy Dave on Wednesday 3rd December 10:42
The bottom of my door is falling apart fast and from the picys i wonder what peoples opinions on whether i should get it re-skinned or just source a 2nd hand door and get it re-sprayed
[pic www.fotango.com/p/eba00390909f00000001.jpg /pic]
[pic www.fotango.com/p/eba00390909f00000002.jpg /pic]
>>> Edited by Dodgy Dave on Wednesday 3rd December 10:42
All depends on the state of the internal structural bits really.
If you look underneath the door i.e. get on the floor with the door open and look underneath; is there any rust on that section?
If there is I would say source a second hand door if not then get a skin, perhaps an ally one?
The Mark 7(6??) doors seem readily available and they have the bars in and whilst they wont provide much more safety its a little more than the normal doors.
If you look underneath the door i.e. get on the floor with the door open and look underneath; is there any rust on that section?
If there is I would say source a second hand door if not then get a skin, perhaps an ally one?
The Mark 7(6??) doors seem readily available and they have the bars in and whilst they wont provide much more safety its a little more than the normal doors.
www.minidoor.co.uk
I think they are about £70 which is more but they do last longer (but also push the problem to a different steel panel...)
I think they are about £70 which is more but they do last longer (but also push the problem to a different steel panel...)
Hi Dave,
Sorry to hear about your doors. I wonder if Chris S. has any spare doors - he might well have. He always says it is not worth changing the skins as there is usually some deeply imbedded corrosion in the door structure and you end up with a pigs-ear of a job. I have changed skins myself, but would be very reluctant to do so again.
Sorry to hear about your doors. I wonder if Chris S. has any spare doors - he might well have. He always says it is not worth changing the skins as there is usually some deeply imbedded corrosion in the door structure and you end up with a pigs-ear of a job. I have changed skins myself, but would be very reluctant to do so again.
Dave, is your car racing green?
If it is and you get new doors I might be interested in your old ones, I have a racing green with 2 very good doors so I’m taking them off to put on my flame, still need a couple of doors so I can get it mot’d and transfer the plate off, not fussed what they look like.
If it is and you get new doors I might be interested in your old ones, I have a racing green with 2 very good doors so I’m taking them off to put on my flame, still need a couple of doors so I can get it mot’d and transfer the plate off, not fussed what they look like.
Dave,
I've just left Chris S. but he is desparately seeking some decent doors himself.
To re-skin a door, paint it, fit it and 'blow-in' the adjacent areas works out at £220 per door. This is cheaper than a brand new door with painting and fitting.
If you want him to do this he says to give him a call.
Peter
I've just left Chris S. but he is desparately seeking some decent doors himself.
To re-skin a door, paint it, fit it and 'blow-in' the adjacent areas works out at £220 per door. This is cheaper than a brand new door with painting and fitting.
If you want him to do this he says to give him a call.
Peter
Cheers Paul you would save me whole lot of trouble if I can get doors the same colour
I'm in no great hurry as the engine is coming out soon but if you could let me know as soon as you do that would be very much appreciated
Thanks Fatboy I couldn’t just take them because ill probably pass them on to Chris if you don’t mind so ill give you some money for them if your sure you don’t need them
Thanks, you guys are too good
>> Edited by Dodgy Dave on Friday 5th December 18:30
I'm in no great hurry as the engine is coming out soon but if you could let me know as soon as you do that would be very much appreciated
Thanks Fatboy I couldn’t just take them because ill probably pass them on to Chris if you don’t mind so ill give you some money for them if your sure you don’t need them
Thanks, you guys are too good
>> Edited by Dodgy Dave on Friday 5th December 18:30
Gassing Station | Classic Minis | Top of Page | What's New | My Stuff