Mini Pickup with 1430 Switune engine and KAD 4 pots
Discussion
I have a 1980 Mini 95. It's solid but the driver's floor has a hole in it.
The engine is a Swiftune 1430cc with Omega forged pistons, 1.5 roller rockers. MD286 scatter pattern cam and an HIF44 carb.
The brakes are KAD 4 pot with vented discs under 10" Revolution 4 spoke wheels.
There may be a 2nd gear synchro issue on the Metro Turbo gearbox.
What is it worth roughly?
PIX: http://s224.photobucket.com/user/ac289/library/Min...
The engine is a Swiftune 1430cc with Omega forged pistons, 1.5 roller rockers. MD286 scatter pattern cam and an HIF44 carb.
The brakes are KAD 4 pot with vented discs under 10" Revolution 4 spoke wheels.
There may be a 2nd gear synchro issue on the Metro Turbo gearbox.
What is it worth roughly?
PIX: http://s224.photobucket.com/user/ac289/library/Min...
Edited by ac427 on Tuesday 10th November 14:48
I've had a look. It is tough one, because people are buying increasingly on body condition, due to the cost that is incurred to fix a classic mini body (properly). Unfortunatly (and I know it is wrong to judge a book by its cover), the mix of paint over the original pageant blue isnt doing the value any favours.
If the underside of your pick up is solid, gets some pics taken, it'll add value and ultimately probably sell it.
If the underside of your pick up is solid, gets some pics taken, it'll add value and ultimately probably sell it.
sim16v said:
Apologies for the thread bump, does anyone know the OP and can they contact him?
Tried through Pistonheads but his email is no longer valid.
Ta.
Quick look found it on MiniforumsTried through Pistonheads but his email is no longer valid.
Ta.
http://www.theminiforum.co.uk/forums/topic/310773-...
Gassing Station | Classic Minis | Top of Page | What's New | My Stuff