Indicators/Reversing and break lights not working

[volores]

The initial message was deleted from this topic on 15 February 2012 at 19:50

[guru_1071]

a fuse i would guess

[Zad]

There may be more than 1 fuse box, so definitely check the manual. Other than that - maybe a bad earth on a light cluster?

[Jon Brown]

Probably a fuse, I had the same problem with mine and fuse kept blowing after fitting a larger bore exhuast.

What was appening was when it was put in reverse the exhaust was rubbing against the reverse light switch (on the gear lever box) and shorting the wiring thus blowing the fuse.

Simple fix just repalced the exhaust mounts.

[volores]

hi

definitely is the fuse......and yes it keeps blowing, must be a short somewhere - has been fine up until this week, not changed anything so not sure where to start....have to pop it into autoelectricans