Leaking Griff boot
Discussion
Check the boot lid fixings. The mounts are bolted through the bodywork in the well that goes around the boot to channel water away. A nut came off mine on the near side and left enough gap for water to come in. I sealed it with silicone glue after fitting a new nut and bolt.
It might not be this but it is worth a go.
AF
It might not be this but it is worth a go.
AF
quote:Same happened to me, especially check the nuts which support the gas-strut, I think this takes more stress when opening and closing the lid. I dobbed a bit of sealant around it as a cure.
Check the boot lid fixings. The mounts are bolted through the bodywork in the well that goes around the boot to channel water away. A nut came off mine on the near side and left enough gap for water to come in. I sealed it with silicone glue after fitting a new nut and bolt.
It might not be this but it is worth a go.
AF
Gassing Station | Griffith | Top of Page | What's New | My Stuff