Water proofing you hood
Discussion
Renovo. Used it recently and it has stopped all leaks along the stitching. I think the stuff you apply with a brush is better than the spray. I also cleaned the fabric with Renovo dry cleaner, wasn't that impressed. I think you can buy it here or via TVRCC. I got mine at a SAAB garage as they use it for their convertables.
Dave.
Edited to add; List of advertisers,
www.pistonheads.com/contact/list.asp
>> Edited by marino on Friday 19th September 00:21
Dave.
Edited to add; List of advertisers,
www.pistonheads.com/contact/list.asp
>> Edited by marino on Friday 19th September 00:21
Another vote for Thompsons Water Seal here. The wicking comment is very true, but I found it a useful way to apply it. Use a natural bristle brush (it just slides off a nylon one and dribbles everywhere) and dab it on to the hood. You can see where you've been so that's not a problem. It took me about 8 coats on my last car, but I think it had never been done in its life prior to that.
Don't forget to give the whole thing a really good scrub before you do it (I took mine in to the shower!) and re-dye it with Renovo beforehand if it needs a bit of a freshen up.
Renovo do a waterproofer which is excellent too, but it seems to be much more costly for only similar performance IMHO. Can recommend almost everything else they do - the colour restorers and rear-screen renovator in particular.
Don't forget to give the whole thing a really good scrub before you do it (I took mine in to the shower!) and re-dye it with Renovo beforehand if it needs a bit of a freshen up.
Renovo do a waterproofer which is excellent too, but it seems to be much more costly for only similar performance IMHO. Can recommend almost everything else they do - the colour restorers and rear-screen renovator in particular.
Gassing Station | Griffith | Top of Page | What's New | My Stuff