Pedal Travel

Pedal Travel

Author
Discussion

davidn

Original Poster:

1,028 posts

266 months

Thursday 3rd April 2003
quotequote all
How much pedal travels is normal on the brake pedal, I am getting about 1-1.5" before anything happens. I have pressure bled the brakes, new fluid, calipers and braided hoses. Pumping the pedal makes no difference although there is a pronounced wheezing from the servo probably` during the first 1-1.5" of freeplay. Is this normal?
David

trefor

14,661 posts

290 months

Thursday 3rd April 2003
quotequote all
That's not much travel. Mine wheezes a little if I get into the footwell and listen carefully too - it's only an 'internal' wheeze though.. I think they all do that ... hope so.

BTW. Not sure if it would be a reason, but check your vacuum hose isn't split/worn out/collapsing. On the Chimaera there are a few points where is can rub through.

shpub

8,507 posts

279 months

Thursday 3rd April 2003
quotequote all
New pads as well. You may find that the travel and feel improves after bedding in and that can take a few hundred miles.

Heliox

450 posts

269 months

Sunday 6th April 2003
quotequote all
When you bleed the brakes make sure that you firstly remove any vaccum left by pressing the brake pedal a few times until it stops wheezing, then bleed the system.

This happened to me recently and I couldnt work it out even with new disks and pads fitted, this trick cured all.

heliox

davidn

Original Poster:

1,028 posts

266 months

Sunday 6th April 2003
quotequote all
Thanks guys, can't remember if I pumped the pedal to remove any vacuum, using the Esi-bleed method. I'll give it a go though.
Thanks
David

xain

261 posts

284 months

Monday 7th April 2003
quotequote all
What difference does clearing the servo of vacuum make? It's not linked the the hydraulics, it just provides a helping hand.

chrish

178 posts

290 months

Tuesday 8th April 2003
quotequote all
Any of you got a view on my brakes problem- see Bleeding Brakes thread?